On Date: Sun, Apr 11, 2010 4:06 pm From: [email protected] To: [email protected]
Thanks for your section in the Motorola Micor, Modification of the older Station Control Module TLN4635B, By Kevin Custer W3KKC. On the repeater-builder, web page is picture of the board layout. [Ryan, you should be able to locate this. http://www.repeater-builder.com/micor/stationcontrol.html ] Any chance there is a schematic for the Station Control Module TLN4635B? Information on the jumpers? Are the Vhf & the Uhf Station Control Modules the same? Mine is on a Uhf Micor. The problem is constant transmit. In my Vhf & Uhf book, there is a section for a Stn ctrl module., TLN5970A. I await reply(s), thanks. 73's, Jim Kh6jkg. -----Original Message----- From: n3ssl <[email protected]> To: [email protected] Sent: Sun, Apr 18, 2010 3:19 pm Subject: [Repeater-Builder] Micor ? Hi Group, I have a Vhf Micor unified station that was modfied prior to ownership. The Mods for the Station control module were performed as on the RB site. The problem I am having is there is no PTT on pin 5 of the back plane. Is there something i should check ? The Station control module is the TLN 4635 Ryan n3ssl
