Make sure that you have DTMF fronts and not selectable MDC1200 fronts, IIRC they looked pretty much alike. The MDC ones had a protrusion at the top while the DTMF ones did not.
Milt N3LTQ ----- Original Message ----- From: <brown7...@bellsouth.net> To: <Repeater-Builder@yahoogroups.com> Sent: Monday, April 26, 2010 12:05 PM Subject: [Repeater-Builder] MT1000 DTMF programming > I have taken up programming MT1000's. I am having trouble getting some > radios that have DTMF to accept the fronts. I have several different model > fronts and have tried them all to no avail. Is there a specific procedure > to get the control module to recognize the DTMF front? I continually get > the message this radio front incapable of DTMF. Sometimes the program > version R03.01.02 states that a model ntn5697A front must be used. That is > an encode/decode front and hard to come by. As I understand it, these > radios should still be able to use the other fronts. I have tried the > continuous and short burst fronts with the same results. Can anyone help > me with this issue? Thanks... Ray > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >