Randy, once you load the codeplug hit the escape key. This brings you back to the main menu. Go to F4 then F5. This gets you to the MODE config menu. At the bottom of the screen F8 is the mode utility. At that point you can add or delete modes. Use the F1 key to get any help.
Deleting trunking modes you will need the syskey. Hope this helps. David WA4ECM From: [email protected] [mailto:[email protected]] On Behalf Of Randy Sent: Sunday, May 16, 2010 12:42 PM To: [email protected] Subject: [Repeater-Builder] Re: spectra tranceiver with 9a dual heads Thanks David, I'm very new to these radio's and i'm stumbling though it blind, I have checked out some of the help information but maybe i need to look a little harder for it. I so have the software on dos and have figures out how to archive and clone programs to other radio's. thanks again --- In [email protected] <mailto:Repeater-Builder%40yahoogroups.com> , "David Murman" <dmur...@...> wrote: > > If you have the software to program the radio there are help files. Just > press f1 after opening up the program and reading the code plug. If you > don't have the software then it is really hard (impossible) to add or delete > modes. > > > > > > > > David > > > > From: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> > [mailto:[email protected] <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of rwrodgers14 > Sent: Friday, May 14, 2010 8:34 PM > To: [email protected] <mailto:Repeater-Builder%40yahoogroups.com> > Subject: [Repeater-Builder] spectra tranceiver with 9a dual heads > > > > > > are there any specific shop manuals that explain how to erase and add modes > or channels? >
