Thanks David for the info. again i'm very new to this and need to ask what is the syskey? And where do i get it or find it?
--- In [email protected], "David Murman" <dmur...@...> wrote: > > Randy, once you load the codeplug hit the escape key. This brings you back > to the main menu. Go to F4 then F5. This gets you to the MODE config menu. > At the bottom of the screen F8 is the mode utility. At that point you can > add or delete modes. Use the F1 key to get any help. > > > > Deleting trunking modes you will need the syskey. > > > > Hope this helps. > > > > > > David > > WA4ECM > > > > From: [email protected] > [mailto:[email protected]] On Behalf Of Randy > Sent: Sunday, May 16, 2010 12:42 PM > To: [email protected] > Subject: [Repeater-Builder] Re: spectra tranceiver with 9a dual heads > > > > > > Thanks David, I'm very new to these radio's and i'm stumbling though it > blind, I have checked out some of the help information but maybe i need to > look a little harder for it. I so have the software on dos and have figures > out how to archive and clone programs to other radio's. thanks again > > --- In [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> , "David Murman" <dmurman@> > wrote: > > > > If you have the software to program the radio there are help files. Just > > press f1 after opening up the program and reading the code plug. If you > > don't have the software then it is really hard (impossible) to add or > delete > > modes. > > > > > > > > > > > > > > > > David > > > > > > > > From: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > [mailto:[email protected] > <mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of rwrodgers14 > > Sent: Friday, May 14, 2010 8:34 PM > > To: [email protected] > <mailto:Repeater-Builder%40yahoogroups.com> > > Subject: [Repeater-Builder] spectra tranceiver with 9a dual heads > > > > > > > > > > > > are there any specific shop manuals that explain how to erase and add > modes > > or channels? > > >
