I think this is what you are looking for -

http://www.trademe.co.nz/Electronics-photography/Radio-equipment/Amateur-radio/auction-292086327.htm

If this will do the job let me know and we can arrange to buy and send it to 
you. I have a paypal account for payment.

I am away from home till Wednesday this week.

Cheers,
Graham.

--- In Repeater-Builder@yahoogroups.com, "Gareth Bennett" <gare...@...> wrote:
>
> Pacific have been out of Kenwood for ages, 
> Best bet is to contact Kenwood directly, or try RF Parts.com in the states.
> 
> Before you do that, check if the power module has in fact "Spat the dummy" as 
> many of the TKR-720 and 820's suffered from dry joints in the PA stage. So 
> firstly I would suck up, clean the contacts and reflow with high silver 
> content solder, especially around the inductors. 
>     Check for high (Or normal) current draw  when running the repeater on 12 
> volts and if there is little or no RF out the transmit socket, suspect dry 
> joints. I've re-soldered more TKR final stages than actually replacing the 
> Hybrid PA module.
> 
> Hope this helps?
> 
> Gareth Bennett
> 
> RadioSystems
> P.O. Box 5202
> Dunedin  9024
> New Zealand
> 
> 
>   ----- Original Message ----- 
>   From: x.tait.tech get real 
>   To: Repeater-Builder@yahoogroups.com 
>   Sent: Sunday, May 23, 2010 9:34 AM
>   Subject: Re: [Repeater-Builder] Need source for UHF power module
> 
> 
>     
>   there is a company here in New Zealand that used to or maybe still does 
> deal with Kenwood products
> 
>    http://www.pacificaerials.co.nz/
> 
>   I know of no one else, other than Kenwood themselves
> 
>   Marcus
> 
> 
> 
> 
> 
>   On Sat, May 22, 2010 at 5:02 PM, byronhham <hellewe...@...> wrote:
> 
>       
>     Hi
>     Does anyone know of a good source for a M57729h-01-p.
> 
>     It is the UHF power module in the Kenwood TKR-820.
> 
>     It is rated at 30 Watts 12 volts 440 to 470 MHz.
> 
>     I found that they do not like to be operated into the wrong side of a 
> duplexer. For even a short time.
> 
>     Is it used in any other transceivers that might be purchased for the 
> module?
> 
>     Thanks
>     Byron NJ7J
>


Reply via email to