Hi skip .The repeater radios are maxon sm4450sc and the link is a tait t2010 The test I have tried in the past have been definitely point to the link being the problem as when we turn the link off the repeater works to its full range but with it on we get desence. We used to have the link closer to the repeaters aprox 487mhz but we shifted it to 517mhz to fix desense and we find we are still having problems.I think the white noise could be the issue but I tried a notch on the link cable tuned to the repeaters receive and that seem to cause more interference and weaken the links Transmit range.I wondered about putting a BP cavity filter inline with the link but since our link frequencies are 5.2mhz apart I feel you can only tuned the filter for either TX or rx frequencies and not both Unless maybe you can install two in pararell ,one tuned to TX and the other rx . Thank You, Ian Wells, Kerinvale Comaudio, 3A Murchison Street,Biloela.4715 Ph 0749922449 or 0409159932 or 0749922574 www.kerinvalecomaudio.com.au -------Original Message------- From: skipp025 Date: 6/28/2010 2:50:00 AM To: [email protected] Subject: [Repeater-Builder] Re: Coax shielding
> "kerincom " <kerin...@...> wrote: > Hi guys .I am just wanted to confirm a question on > coax shielding .
