I'm surprised the 2940 didn't work. Are you sure it's not a term/ID problem?
If you dare you could try cracking open the DLT and connecting the
mechanism via ribbon cable to the card internally.
Ronnie Livingston wrote:
>
> I have a Quantum DLT8000 tape drive that I want to hookup to a BW G3.
> Currently, I have two Adaptec cards in the BW. One is a BTO card that came
> with the machine (Ultra-2 SCSI, LVD). The other is a 2940UW that I
> purchased to run another tape drive. When I plug the DLT8000 into the U2LVD
> card, the BW will not recognize any of the drives on the SCSI chain - bad
> thing since my hard drives are chained off that one.
>
> I just found out that the DLT8000 is Ultra2 HVD. Will LVD and HVD not work
> together? Does anyone know off hand what SCSI card from Adaptec I will need
> to buy to make this work?
>
> Thanks
> Ron Livingston
> Systems Engineer
> Siecor RD&E
> [EMAIL PROTECTED]
>
> --
> ----------------------------------------------------------
> To subscribe: [EMAIL PROTECTED]
> To unsubscribe: [EMAIL PROTECTED]
> Archives: <http://list.working-dogs.com/lists/retro-talk/>
> Problems?: [EMAIL PROTECTED]
--
top of the world,
Luke Jaeger, Technology Coordinator
Disney Magazine Publishing
Northampton, Massachusetts
[EMAIL PROTECTED]
Any opinions expressed in this message are my own and may not represent
the opinions of Disney Publishing, etc etc etc.
*
--
----------------------------------------------------------
To subscribe: [EMAIL PROTECTED]
To unsubscribe: [EMAIL PROTECTED]
Archives: <http://list.working-dogs.com/lists/retro-talk/>
Problems?: [EMAIL PROTECTED]