G'day Teoh,
On 30/06/2016 11:47, Teoh Choon Zone wrote:
I rechecked and found out that I didn't use fpga_bridge3. I disabled and
regenerate the DTB but the error still happened. The error looks like the
fpga_manager
cannot find my rbf, no? Am I putting it at the correct place, which is
"/lib/firmware"?
I'm interested in how this works as well.
Did you have to do anything with udev rules?
Mine contains:
cat /lib/udev/rules.d/50-firmware.rules
# do not edit this file, it will be overwritten on update
SUBSYSTEM=="firmware", ACTION=="add", RUN{builtin}="firmware"
Another question, do I configure the DTS correctly, especially the reg and
ranges. I attached along my working DTS which I used in kernel 3.10.
On Wed, Jun 29, 2016 at 9:38 PM, Dalon Westergreen <dwest...@gmail.com
<mailto:dwest...@gmail.com>> wrote:
Are you really using all of the FPGA bridges?
fpga-bridges = <&fpga_bridge0>, <&fpga_bridge1>,
<&fpga_bridge2>, <&fpga_bridge3>;
??
On Wed, Jun 29, 2016 at 2:11 AM, Teoh Choon Zone <choon-zone.t...@vie.com.my
<mailto:choon-zone.t...@vie.com.my>> wrote:
I'm testing the new framework to program FPGA through DTB overlay. But after I
execute "echo socfpga_gen3cam_fpga.dtbo >
/config/device-tree/overlays/socwks/path", I get error "fpga_manager fpga0:
Error requesting firmware cyclonev_bw.rbf". FYI, I have put cyclonev_bw.rbf
in /ib/firmware. Any idea guys? I attached along my DTS.
--
Regards
Phil Reid
_______________________________________________
Rfi mailing list
Rfi@lists.rocketboards.org
http://lists.rocketboards.org/cgi-bin/mailman/listinfo/rfi
