I have an intel S5000Psl motherboard with 2 nic cards. Using the GUI console, I set one to be IP4 and not IP6 fully configured with gateway, dns, hostname, etc. I set the other on my LAN (tried with and without a gateway defined) no dns, etc. I also tried the 2nd as fully configured (not IP6) as I could. On both nic cards, I select start on boot. The symptoms remain consistent.
While the system is up, I can activate both lans and they both work beautifully. When I reboot, only one activates, the other says inactive. I can hand activate and life is again good. The net icon in the upper right corner will only allow one network to be selected at a time. I'm not sure what's up with that, or why an network chooser icon is thought to be so needed as to be default placed on the desktop. (my ignorance showing) Is there a clean way to have both networks launch on bootup? Thanks in advance! Bill Watson [EMAIL PROTECTED] _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
