Hi,
On a specific piece of hardware, which is working fine with RHEL 4
and RHEL 5.0, X is not working anymore with RHEL 5.1:
- As soon as X starts, the screen blanks -- and that's it. The X server
*stays* running (it doesn't die!), keyboard/mouse are not working
anymore, and I can only access the system remotely or push the power
button.
- Graphical install is not possible for this reason.
- After a text install, I see the same symptoms when I do "startx"
or try to do "system-config-display".
- The system has a built-in Intel 915, of which the lspci -v output is:
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express
Chipset Family Graphics Controller (rev 0e) (prog-if 00 [VGA])
Subsystem: Intel Corporation 82915G/GV/910GL Express Chipset Family
Graphics Controller
Flags: bus master, fast devsel, latency 0, IRQ 145
Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ff00 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at fdf80000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [d0] Power Management version 2
- There are no errors "(EE)" in Xorg.0.log, I can post its contents
if needed.
- FWIW: on this piece of hardware I (always) *need* to use "acpi=off",
as otherwise the SATA-disk/driver is not working properly.
Any suggestions?
--
-- Jos Vos <[EMAIL PROTECTED]>
-- X/OS Experts in Open Systems BV | Phone: +31 20 6938364
-- Amsterdam, The Netherlands | Fax: +31 20 6948204
_______________________________________________
rhelv5-list mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/rhelv5-list
