Tom Sightler wrote:
On Thu, 2008-04-03 at 10:37 -0400, Geoffrey wrote:
Sharpe, Sam J wrote:
When I attempt to boot from the Red Hat 5.1 install DVD, I see the
following in the logs:
ide-cd: cmd 0x28 timed out
hda: DMA interrupt recovery
lost interrupt
lost interrupt
lost interrupt
lost interrupt
I've tried the Red Hat 5.1 install cd as well as the Red Hat 4 install
cd, same problem. Centos 5.1 gives the same issue.
Try booting with "linux hda=noprobe"
Yeah, tried that as well. It produces the same problem as the
askmethod, where every keystroke is duplicated.
Since both of the issues you describe seem like they might be related to
interrupts it might be worth trying some of the common interrupt related
boot options like "pci=nommconf", "pci=noacpi" etc. Or perhaps a
combination of those options.
Tried all variants of the two, still no go.
I did see the following though:
hda: status error: status=0x59 { DriveReady SeeComplete DataRequest Error}
ide: failed opcode was: unknown
hda: drive not ready
--
Until later, Geoffrey
Those who would give up essential Liberty, to purchase a little
temporary Safety, deserve neither Liberty nor Safety.
- Benjamin Franklin
_______________________________________________
rhelv5-list mailing list
rhelv5-list@redhat.com
https://www.redhat.com/mailman/listinfo/rhelv5-list
