Try setting your bonding options in ifcfg-bond0 like the following: DEVICE=bond0 BOOTPROTO=static ONBOOT=yes IPADDR=192.168.0.1 NETMASK=255.255.255.0 BONDING_OPTS="mode=active-backup miimon=5 updelay=250"
You should be able to do that for each bond although I have not tested it so don't know if it will work. The only thing you then need in modprobe.conf is alias bond0 bonding alias bond1 bonding etc. Regards > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:rhelv5-list- > [EMAIL PROTECTED] On Behalf Of Jan-Frode Myklebust > Sent: 16 April 2008 11:23 > To: [email protected] > Subject: [rhelv5-list] running bonds with different configs ? > > What's the recommended way to configure multiple > bonds with different configs on RHEL5 ? I've seen > a couple of alternative solutions, but haven't found > them to work... > > F.ex. I want to run bond1 with "mode=active-backup miimon=100" and > bond2 with "mode=active-backup arp_interval=60 > arp_ip_target=192.168.30.2". > How would this be configured in modules.conf ? > _______________________________________________ rhelv5-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/rhelv5-list
