VPN is up and running and the servers are all on the 10.8.0.* network but they still dont seem to be able to send/recieve?
is there anything else i should be aware of? -- Wayne Douglas Sent with Sparrow On Monday, 28 February 2011 at 17:11, Wayne Douglas wrote: > just configuring open vpn now > > > -- > Wayne Douglas > Sent with Sparrow > On Monday, 28 February 2011 at 17:10, Corey Kaylor wrote: > > That might be the best bet. I haven't personally tried to setup a VPN on > > EC2, but it seems that others have successfully. > > > > On Mon, Feb 28, 2011 at 9:24 AM, Wayne Douglas <codingvi...@googlemail.com> > > wrote: > > > so i guess i need to create a vpn in the cloud to connect all the > > > servers? > > > > > > -- > > > Wayne Douglas > > > Sent with Sparrow > > > On Monday, 28 February 2011 at 16:00, Ayende Rahien wrote: > > > > I don't suggest opening this over the internet, no. It isn't really > > > > suited for that. > > > > > > > > On Mon, Feb 28, 2011 at 2:19 PM, Corey Kaylor <co...@kaylors.net> wrote: > > > > > Yes, I guess that is true it *might* work. Are you saying then Ayende > > > > > that you would recommend exposing rhino queues over the Internet? I > > > > > can't say that I would agree. > > > > > > > > > > On Feb 28, 2011, at 3:21 AM, Ayende Rahien <aye...@ayende.com> wrote: > > > > > > > > > > > No, rhino.queues just need to be able to reach it. > > > > > > I _think_ that you can just put the IP address in msmq as well not > > > > > > sure > > > > > > > > > > > > On Mon, Feb 28, 2011 at 10:07 AM, Wayne Douglas > > > > > > <codingvi...@googlemail.com> wrote: > > > > > > > is that with both msmq and rhino.queues? > > > > > > > > > > > > > > -- > > > > > > > Wayne Douglas > > > > > > > Sent with Sparrow > > > > > > > On Sunday, 27 February 2011 at 21:03, Corey Kaylor wrote: > > > > > > > > Yes, currently it is required to be on the same network. At > > > > > > > > some point in the future I plan to add a gateway, likely a > > > > > > > > simple http gateway. that would remove this requirement. I > > > > > > > > won't have time to do this for some time. > > > > > > > > > > > > > > > > On Sun, Feb 27, 2011 at 1:44 PM, Wayne Douglas > > > > > > > > <codingvi...@googlemail.com> wrote: > > > > > > > > > Hi > > > > > > > > > > > > > > > > > > i have the following setup: > > > > > > > > > > > > > > > > > > server-1 : web front end > > > > > > > > > server-2 : services 1 > > > > > > > > > server-3 : services 2 > > > > > > > > > server-4 : esb > > > > > > > > > > > > > > > > > > i want the services on server-1 to publish messages for > > > > > > > > > services on server-2 to receive via the esb and vice versa. i > > > > > > > > > have opened up the ports as suggested here: > > > > > > > > > http://support.microsoft.com/kb/183293 > > > > > > > > > > > > > > > > > > the machines are on amazon ec2 and are not part of the same > > > > > > > > > network - they do provide the ability to create a network i > > > > > > > > > think but it costs more so would only want to do that if i > > > > > > > > > have to. > > > > > > > > > > > > > > > > > > to make this work, what do i need to do? do they need to be > > > > > > > > > part of the same network? are there any other ports i need to > > > > > > > > > open? > > > > > > > > > -- > > > > > > > > > Wayne Douglas > > > > > > > > > Sent with Sparrow > > > > > > > > > -- > > > > > > > > > You received this message because you are subscribed to the > > > > > > > > > Google Groups "Rhino Tools Dev" group. > > > > > > > > > To post to this group, send email to > > > > > > > > > rhino-tools-dev@googlegroups.com. > > > > > > > > > To unsubscribe from this group, send email to > > > > > > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > > > > > > For more options, visit this group at > > > > > > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > > > > > > > > > > > > -- > > > > > > > > You received this message because you are subscribed to the > > > > > > > > Google Groups "Rhino Tools Dev" group. > > > > > > > > To post to this group, send email to > > > > > > > > rhino-tools-dev@googlegroups.com. > > > > > > > > To unsubscribe from this group, send email to > > > > > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > > > > > For more options, visit this group at > > > > > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > > > > > > > Google Groups "Rhino Tools Dev" group. > > > > > > > To post to this group, send email to > > > > > > > rhino-tools-dev@googlegroups.com. > > > > > > > To unsubscribe from this group, send email to > > > > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > > > > For more options, visit this group at > > > > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "Rhino Tools Dev" group. > > > > > > To post to this group, send email to > > > > > > rhino-tools-dev@googlegroups.com. > > > > > > To unsubscribe from this group, send email to > > > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > > > For more options, visit this group at > > > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > > > Groups "Rhino Tools Dev" group. > > > > > To post to this group, send email to > > > > > rhino-tools-dev@googlegroups.com. > > > > > To unsubscribe from this group, send email to > > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > > For more options, visit this group at > > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "Rhino Tools Dev" group. > > > > To post to this group, send email to rhino-tools-dev@googlegroups.com. > > > > To unsubscribe from this group, send email to > > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > > For more options, visit this group at > > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > > > -- > > > You received this message because you are subscribed to the Google > > > Groups "Rhino Tools Dev" group. > > > To post to this group, send email to rhino-tools-dev@googlegroups.com. > > > To unsubscribe from this group, send email to > > > rhino-tools-dev+unsubscr...@googlegroups.com. > > > For more options, visit this group at > > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Rhino Tools Dev" group. > > To post to this group, send email to rhino-tools-dev@googlegroups.com. > > To unsubscribe from this group, send email to > > rhino-tools-dev+unsubscr...@googlegroups.com. > > For more options, visit this group at > > http://groups.google.com/group/rhino-tools-dev?hl=en. > > > -- You received this message because you are subscribed to the Google Groups "Rhino Tools Dev" group. To post to this group, send email to rhino-tools-dev@googlegroups.com. To unsubscribe from this group, send email to rhino-tools-dev+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/rhino-tools-dev?hl=en.
