https://atlas.ripe.net/about/faq/#i-have-an-ipv6-only-network-will-the-probe-work-on-it
______________________________________________________________ > Od: "Phillip Remaker" <[email protected]> > Komu: "Philip Homburg" <[email protected]> > Datum: 22.03.2019 17:16 > Předmět: Re: [atlas] Probe not coming online anymore after firmware upgrade > > CC: <[email protected]> >Can the probbes operate in IPv6 only environments, or IPv6-DNS-Only >environments? > >On Fri, Mar 22, 2019 at 3:59 AM Philip Homburg <[email protected]> >wrote: > >> On 2019/03/21 16:41 , Annika Wickert wrote: >> > I bought a new USB Stick for this probe as the old one was tagged as >> > readonly etc.. >> > https://atlas.ripe.net/probes/23913/ >> > >> > But for some reason it is not coming online at all . >> > >> > Any idea what could be the issue? I also see no network traffic at all >> > originating from the probe. >> >> Hi Annika, >> >> I looked at the settings for your probe and noticed that two DNS >> resolvers were configured with IPv6 addresses. >> >> The probe was able to connect to our reg. servers and download firmware. >> So I suspected that forcing the probe to use those DNS resolvers could >> be the cause of the problem. >> >> Shortly after disabling that configuration the probe managed to connect. >> Unfortunately, for reasons unknown to me, it disconnected 12 minutes later. >> >> Philip >> >> > >
