Sorry for the multiple responses... As for what you should do, you should use physical resistors (that would be my prefered solution) as software switches can sometimes, accidentally or for no apparent reason, get reset and then you get erratic behaviour. Those pull-(up|down) resistor software switches actually enable real, internal resistors inside the chips. Using physical resistors outside of the chips will not affect wether the internal ones are enabled or not, so you are better off using physical resistors.
-- Sébastien Leblanc _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
