If you are going to use this with closures, like from a satellite receiver, you'll want to connect your common to the HI (+5V) hole for pull-up. That is assuming you have normal closures that short to ground when closed. You'll want your inputs to be normally high for "off", then low when the relay closes for "on".
Michael On Fri, Aug 17, 2012 at 11:30 AM, Wayne Merricks <[email protected]> wrote: > I was going to try the quick and dirty approach of ordering a bunch of > 2.2k resistors, connecting one end to the 0v pin etc. > > Basically replicating the schematic in the manual (attached). > > I never had an option to specify input/output from the supplier of the > board. They seem to be harder to get hold of in the UK, I'm pretty sure > the supplier eventually shipped this from the states. > > > Wayne Merricks > The Voice Asia > > _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
