Not quite sure why this is happening, any ideas? 1.7.2 RD, after setting more than one serial trap it isn't catching them on the serial port until I send something out the serial port first. Then it's fine until I reboot the machine and have to send something out the serial port again before the serial traps will work.
I have the serial ports all set to 9600, no flow control, and 9600 on the sending device. If I only set one serial trap on the serial port, it works fine. It's when I have a second serial trap also setup before the first serial data arrives at RD, that upon first boot it completely ignores the incoming serial port. What I've also noticed, is, if I set the first trap, then wait for data to arrive, I can then set the second trap and all is well. At the moment I'm only setting the traps manually via the sound panel in my "test" panel. So I can easily set and clear them. This is 100% reproducible. Am I sopose to have multiple macro carts for setting multiple serial traps, or am I sopose to set them all in a single macro cart? I can remember to send serial before setting the traps, this makes sure everything works, but it's something I have to not forget or the serial traps fail when I'm not arround. Cheers, Gavin. _______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
