Hi Guys,
Thanks for everyone's help a couple of weeks ago. I now have a bit more time on my hands to complete this project for the local Primary School. Few problems that came up that I request some assistance. 1. I am running the system on 2x Dell Optiplex GX620s. The one that will be running the main studio has 2 video outputs, 1x analogue and the other a digital output. I have them connected to a LCD monitor each. I was able to get them to some video on both screens, but I cannot seem to find a setting to expand it over the 2 screens, so I can have Airplay on one monitor and Carts on the other. Any ideas? 2. In one of my last emails I had a problem where I wasn't able to connect to the internet after a reboot. Someone wrote back that I needed to have my DNS IP address set. This worked. However I started the computer up this morning after it was switched off for a week. And I found that I could not connect to the internet again, checked the PC IP address, still the same, so checked DNS and the IP address for my ISP had disappeared. Put it back in and away it went, finding the internet. When I go into the network and DNS there does not appear to be a save setting button. So I am guessing that the DNS setting will disappear again if I need to shut-down again. 3. I am setting up the second box as the remote and want it to look at the main box for the library, I am slowly reading through the information to get it to work. Is there any advice to make the install work out easier? I am just about to use the appliance CD to do the install, do I address the library at this time or later? Also if I add a new file to the library on the main, the remote will see it straight away? If there is any other advice that you can add to help me along, I'd be grateful for it. Regards Kevin.
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
