On 5/9/14 5:17 AM, Wayne Merricks wrote:
Hi,
Not sure if it helps, but heres how I got polymer installed on Debian 7:
Install some qt3 stuff:
sudo apt-get install qt3-qtconfig qt3-dev-tools
Sorry John, Wayne beat me to it this morning. On the appliance, you'll
have to use yum in place of apt-get or the gui software control (under
System -> Administration -> Add/Remove Software) to install qt3-config,
which I think you said you had already gotten qt3-config installed.
Download the polymer source (found a link in Debian lenny on launchpad):
wget
https://launchpad.net/debian/lenny/+source/polymer/0.3.2-4/+files/polymer_0.3.2.orig.tar.gz
untar it and compile:
tar -zxvf polymer_0.3.2.orig.tar.gz
cd ~/polymer-0.3.2
./configure
make
install it:
sudo make install
That should get you working on the appliance with no modifications.
That's exactly what I used to get it running on my appliance systems
last week.
If you have trouble finding the source tarball, I think I archived it
somewhere around here after I finished mine up.
Good luck!
Tim
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
