I haven’t gotten to this yet in setup and testing. Mostly whatever I try sounds horrible and I have left the segue’s alone for another day. Also I am having trouble saving edits to the markers. But perhaps this applies: http://www.wave1049online.net/Rivendell/ He says: * Each song must have a second or so of silence at the start * Each song must have about 4 seconds of silence at the end * Each seque must be at least 1.5 seconds in duration or it won't "hit" correctly * Each song must end at least 1.5 seconds after the end of its seque · The silence at the beginning and end of each track is very important. When it comes time to trim the events, you'll be glad you did that because, although the songs will look good in Rivendell's library manager, the won't seque correctly unless there is adequate space, especially at the end of the track, to ensure that segues are a minumum of 1.5 seconds in duration, and the defined end of the track is at least 1.5 seconds away from the end of the segue. If these conditions are not met, the segues won't hit correctly on the air. We wasted an extra 2 weeks learning that lesson the hard way. · Even if you have a piece of imaging or a sound effect or something whose duration is less than a second, you're still going to need that second of silence in front and that 4 seconds of silence in back, or its segue will be nasty. You won't like it. TC From: [email protected] [mailto:[email protected]] On Behalf Of Pedro Picoto Sent: Thursday, June 26, 2014 1:39 PM To: [email protected] Subject: [RDD] Segue start failing I've noticed that randomly the segue start point isn't respected. Each time I listen to one failing I check it on the RDLibrary and it's correctly marked. Running version 2.8.1. and never had this problem before. I've been using/testing/learning this version for quite a while.
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
