I'm trying to get Rivendell to look at a stream of serial data from a satellite
receiver and am running into intermittent issues.
If I bring up minicom, I can see the strings come through without a problem.
Occasionally, I am able to get the carts to fire off correctly with Rivendell
based on serial port strings. Serial ports are working in that I have a
switcher on the computer that works fine through Rivendell.
Here is what I am doing:
1. Configure Serial Port 1 in RDadmin:
Serial Port 1: /dev/ttyS1
Configured 9600, N81
2. Perform Insert to watch for string "#U12@":
SI 1 54114 #U12@!
3. Set cart 54114 to log the event into a file:
(Tested, and working).
When I watch the logs, can see the test that I run but cannot always see the
serial traffic. Sometimes it works, sometimes it does not. I am just not sure
what sequence of activities I run that make it work versus not.
Is there a way to better troublehshoot how Rivendell works with Serial Traps?
Is there an initialization sequence that I am missing?
Thanks in advance.
Brian
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
