On Oct 30, 2014, at 06:08 56, Peter van Embden <[email protected]> wrote:
> The question still remains: can Rivendell be configured to either ignore the > button start or just play in one channel when in automatic mode. As far as I > can see in the reactions, the answer seems "no"... ? Because that's still the > most easy solution. How about this: we define three macro carts (say, in RDAdmin->ManageHosts->[hostname]), one for each operating mode (Automatic, LiveAssist, Manual). The respective macro cart gets called each time its corresponding mode is enabled. That way, different sites could program the system to take ‘whatever action is appropriate’ when entering each mode. In your case, that action would be to enable/disable the GPI mapping for the console remote start, but it could in theory be anything (change an indicator on the wall, send an e-mail, etc, etc). Cheers! |----------------------------------------------------------------------| | Frederick F. Gleason, Jr. | Chief Developer | | | Paravel Systems | |----------------------------------------------------------------------| | With sufficient thrust, pigs fly just fine. However, this is | | not necessarily a good idea. It is hard to be sure where they | | are going to land, and it could be dangerous sitting under them | | as they fly overhead. | | -- RFC 1925 | |----------------------------------------------------------------------| _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
