I am curious, what system?? On Thu, 2014-10-30 at 06:55 -0700, Lorne Tyndale wrote: > Hi, > > > The question still remains: can Rivendell be configured to either ignore > > the button start or just play in one channel when in automatic mode. As far > > as I can see in the reactions, the answer seems "no"... ? Because that's > > still the most easy solution. > > > > One automation system (not Rivendell, I won't mention which one since it > does not matter) that I work with has the ability to change what > channels get used for play out on-air on the fly. You can set it up to > go: > > > A - B - C - D > > or > > A - B - C > > or > > A - B > > or > > A > > You select the playout mode you want from a pull-down, and it'll swap it > into that mode. The only issue is that it'll always use at least > channel A. However it is quite useful for those times when - for > example - an issue with one of the channel modules in the console turns > up and you have to pull that module for repair - just change the playout > mode so it doesn't use that channel, pull the module out, repair it (or > pop in a spare if you have one of them), and no one on-air will know any > better and you never miss a beat. > > I'm not sure if this type of feature could be added into Rivendell > (perhaps via a macro)? It might be one to consider. > > > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
