I run a similar setup without Rivendell but with Jack, liquidsoap and
others. I found making a set of upstart scripts worked really well.
Obviously not something you can do on debian current but Ubuntu allows
you to say start on x e.g. jack starts and sends signal jack started.
Liquidsoap script receives jack started and then starts.
I think Systemd provides something similar, I just don't think
On 2014-11-24 18:12, Rob Landry wrote:
I have built more than a dozen Rivendell machines running Debian
Squeeze or Wheezy, all of them running Rivendell compiled from
source,
and have never experienced a race condition starting the daemons.
The only machines where daemon start-ups are problematic are two that
run JACK. These machines feed Internet-only streams and run
Rivendell,
liquidsoap, and icecast, and the start-up process is hairy. But my
other machines, which use ASI cards and no JACK, never seem to have
problems.
Rob
On Sun, 23 Nov 2014, Jim Stewart wrote:
Sorry, I guess I over-trimmed the thread behind this post. I've
been using Debian Linux (both 32 and 64 bit depending on actual
hardware I'm running it on), the primary "on air" machine is still
running the older "Squeeze" distribution, everything else I have
Rivendell on runs "Wheezy" except for a personal laptop I have that is
on "Sid" but is not set up to function for the radio station in any
way. I typically use the binaries from Tryphon, but have compiled my
own at times to get a latest fix or features.
In any case, my gripe here is that it seems that these daemons fail
to do enough sanity checks, and tend to suffer from "race conditions".
"ripcd" can either quietly, not start up, or start up incorrectly if
"caed", which appears to need to start up first, is not yet ready to
receive some sort of communication from it. In the past and present,
this has caused many hours of confusion for me.
________________________________________
Date: Sun, 23 Nov 2014 09:38:17 -0500
From: Cowboy <[email protected]>
Subject: Re: [RDD] Rivendell Not Recognizing Macros Commands
On Saturday 22 November 2014 09:44:52 pm Jim Stewart wrote:
It was all in the ordeal I have to go through to get the Rivendell
daemons to load correctly.
This should not be an issue.
What OS ?
--
Cowboy
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
