Thanks for the excellent help on this guys - I appreciate you taking the
time.
Regards
Warren Mead
On 15/01/15 02:58, James L. Stewart wrote:
Assuming you DON'T have a console with Axia link capability, you then
need GPIO capability on your Rivendell computer, or perhaps some fancy
TCP/IP system behind your "button" that would be able to send out an
RML command through Ethernet.
In my case I have a Broadcast Tools ACS 8.2 switcher with GPIO
capability that Rivendell fully supports.
I will assume you have some sort of GPIO capability:
You then wire the switch up to a GPIO input, and configure the trigger
in rdadmin to play a macro. It is quite buried:
Manage Hosts > [Host] > RDAirplay > Switchers GPIO > Switchers >
[Swithcher/GPIO] > Configure GPIs.
You then tell the GPI to run on macro on either "ON" or "OFF" (could
depend on how the switch is wired)
The Macro then just needs to have this command in it:
PL 1!
(for Play Log 1)
If you also want to switch from "live Assist" to "Auto" mode, you will
also need to add that command:
PM 2 1!
I often fancy the macro up by adding something like:
LC BLUE Remote Started Playlist!
SP 1000
LC BLUE !
On 1/14/2015 10:00 AM, [email protected]
wrote:
[RDD] correct way to remote start RDAirplay without mouse
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
