Generally nowadays when you've got a mono (e.g. MW/AM) service, you'll be stereo for most of the chain and mono at the last sensible point. Especially if you've got digital splits and whatnot to feed.
If there's other stuff on the TX chain I'd suggest looking at doing it in the analogue world. You can do it with a transformer, Alice Monopack or similar. This reminds me of a recent fault on an AM service fed by DAB tuner. There were listener complaints of "missing a leg" as the output from the DAB tuner hadn't been set to mono the output. Regards, Marc. On Wed, 11 Nov 2015 at 21:24, Christian Pointner <[email protected]> wrote: > Hi, > > Am 11.11.2015 um 21:09 schrieb Chris Howard - CBR: > [...] > > My soundcard system is M-Audio Delta 1010. > > > [...] > > I can't find any direct way to do a mix-down from stereo > > to mono using the envy24control or alsamixer. > > Maybe it is there, but I haven't found it. > > > If you don't need it already for something else, you could use the > Digital Mix. > Just route the 2 PCMs used by Rivendell to the Digital Mix (both to the > Left Channel) and and then select the Digital Mix at the Patchbay/Router > settings for the output to the transmitter. > > regards > christian > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
