I was wondering if it had something to do with the order I originally used (I first started the Daemons without a host existing in rdadmin and then used the local rdadmin to set up the host entry).
However no amount of restarting once that was complete populated the data. I might recompile with a bit of debug lines added just to see what's going on. --Nick On Tuesday, March 1, 2016, Nick Andre <[email protected]> wrote: > I saw that but was more curious why the DB wasn't updating in its own. > > I am noticing some MySQL errors from the old database on stderr if I run > rdadmin from the command line. Not sure what that means or whether it's > related. This is a 6 year old install. > > Also I already have a card 0 so the card would need to be changed to card > 1. > > Worse comes to worse we are just going to migrate in one fell swoop. Sad > the more elegant solution isn't working. > > On Tuesday, March 1, 2016, Wayne Merricks <[email protected] > <javascript:_e(%7B%7D,'cvml','[email protected]');>> wrote: > >> Usually, I would expect resource not generated as the first run into the >> DB for a new host. As soon as you restart the Rivendell services (or >> reboot the machine) the DB will get updated with the audio config info as >> soon as caed etc runs. >> >> Worst case scenario, the audio config is just a DB entry in the STATIONS >> table. You could copy the line from your working local copy into the >> server DB and see if that helps? (Backup your DB first just in case). >> >> On 01/03/16 15:23, Nick Andre wrote: >> >> Yes. I'm wondering if there's something unsupported about this >> configuration. >> >> If I create a local database everything generates just fine and my ASI >> card is assigned to Card 0 on the local system. When I take the same exact >> configuration and point it to the old server/database it doesn't generate >> audio resource data. I've double checked that the IP matches in the remote >> case (I can't eliminate the possibility I'm being excessively foolish but I >> can >> use rdadmin from the remote computer). >> >> I'd be interested to dig in a bit and see what it's doing and where it's >> failing. As a last ditch effort I can also repeat the install procedure on >> a new VM and see if anything different happens (would be good for our >> documentation as well). >> >> On Tuesday, March 1, 2016, Wayne Merricks <[email protected]> >> wrote: >> >>> Stupid question, did you add the new host name to rdadmin, is the IP >>> address correct for the new host? >>> >>> On 29/02/16 21:09, Nick Andre wrote: >>> >>> I have one ASI card on the system (Card 0 in the old server). I've >>> installed an ASI card on this new machine too (and left the index on the >>> card at the default 1). The rdhpiinfo shows me that the card appears to be >>> all set. But for some reason it's not correctly populating the audio >>> resources data on service start. >>> >>> Has anyone tried to migrate to a new host before? Basically we want to >>> get both hosts running in parallel each with their own ASI card and then >>> migrate all playout hosts (that just run rdairplay) swapped over to the new >>> server. >>> >>> >>> On Sun, Feb 28, 2016 at 2:09 PM Nick Andre <[email protected]> wrote: >>> >>>> I'm getting the "audio resource data has not been generated" error in >>>> RDAdmin for a new host (with a Livewire ASI card). However, restarting >>>> doesn't appear to generate that data. I also don't see the ASI card being >>>> detected. Output when I restart the host: >>>> >>>> Feb 27 16:13:11 rivendell rdcatchd: rdcatchd exiting >>>> Feb 27 16:13:11 rivendell ripcd: ripcd exiting normally >>>> Feb 27 16:13:11 rivendell caed: cae exiting >>>> Feb 27 16:13:13 rivendell caed: unable to communicate with JACK server >>>> Feb 27 16:13:13 rivendell caed: JACK general failure >>>> Feb 27 16:13:13 rivendell caed: no connection to JACK server >>>> Feb 27 16:13:13 rivendell caed: MPEG L2 encoding not enabled >>>> Feb 27 16:13:13 rivendell caed: Found MAD decoder library, MPEG L2 >>>> decoding supported >>>> Feb 27 16:13:13 rivendell caed: using realtime scheduling, priority=8 >>>> Feb 27 16:13:13 rivendell caed: cae started >>>> Feb 27 16:13:15 rivendell ripcd: started >>>> Feb 27 16:13:16 rivendell rdcatchd: rdcatchd engine load starts... >>>> Feb 27 16:13:16 rivendell rdcatchd: loaded 0 events >>>> Feb 27 16:13:16 rivendell rdcatchd: rdcatchd engine load ends >>>> Feb 27 16:13:16 rivendell rdcatchd: rdcatchd started >>>> >>>> >>> >>> _______________________________________________ >>> Rivendell-dev mailing >>> [email protected]http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >>> >>> >>> >>
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
