I changed my name on my hostname to the IP address and rdserv and will show me [root@rdserv rd]# service rivendell restart Stopping Rivendell system daemons [ OK ] ripcd: Couldn't open mySQL connection! ERROR rdcatchd aborting - Couldn't open mySQL connection!Starting Rivendell system daemons [FAILED]
On 7/17/16, Tom Van Gorkom <[email protected]> wrote: > Not to jump into the middle of this discussion but for what it's worth, you > will need to change 3 things in rd.conf to get it working. > > If you have not changed the user names that came with the install, then > make the following changes: > > [Identity] > ; These entries are used to define the system user and group that will > ; own the audio files. > AudioOwner=rd > AudioGroup=users > > Then point the client to your server: > > [mySQL] > ; The connection parameters for the MySQL server. > Hostname=rdserver (the name you gave to your server or the IP address > works also) > Loginname=rduser > Password=letmein > Database=Rivendell > Driver=QMYSQL3 > > We disable mySQL on the clients. Also make sure that you add all of your > hosts to the hosts file with their IP addresses on all machines. > > You need to make sure you give all the correct permissions on the server > mySQL - I assume you found directions for doing that from what you said > earlier. > > Be sure to create an exportfs for the shared folders if you have some such > as rd_xfer and export it on the server, and then add the shared file(s) on > your fstab list on each client and mount them. > > That's what I remember without being where I can look at my notes. Hope it > helps. > > Tom Van Gorkom > Radio Esperanza Engineering, KRIO AM/FM, KOIR FM > Office: 956-380-8150 > Cell: 865-803-7427 > > Rio Grande Bible Institute > 4300 S US Hwy 281 > Edinburg, TX 78539 > > On Sun, Jul 17, 2016 at 6:08 AM, Ryan Kin <[email protected]> wrote: > >> Hey Wayne, this is my rd.conf folder >> >> >> ; rd.conf >> ; >> ; This is the default configuration file for Rivendell >> ; >> ; by Fred Gleason <[email protected]> >> ; >> >> [Identity] >> ; These entries are used to define the system user and group that will >> ; own the audio files. >> AudioOwner=rivendell >> AudioGroup=rivendell >> >> ; This password is used by the various Rivendell modules to log into >> ; Rivendell system services [caed(8), ripcd(8), rdcatchd(8)]. >> Password=letmein >> >> ; This entry is what will appear in RDSelect's list for this >> configuration. >> Label=Default (Local) >> >> [mySQL] >> ; The connection parameters for the MySQL server. >> Hostname=localhost >> Loginname=rduser >> Password=letmein >> Database=Rivendell >> Driver=QMYSQL3 >> >> [AudioStore] >> MountSource= >> MountType= >> MountOptions=defaults >> CaeHostname= >> XportHostname= >> >> [Logs] >> ; Set the method to be used for logging. Possible values are: >> ; Syslog = Use the syslog facility. >> ; File = Log directly to a file. See also the 'LogDirectory=' >> ; and 'LogPattern=' parameters below. >> ; None = Don't generate logs at all. >> Facility=Syslog >> >> ; The directory to write logs to. Used only if the 'Facility=' >> ; parameter is set to 'File'. >> LogDirectory=/home/rd/rdlogs >> >> ; The directory to to put core files in in the event of a daemon >> ; crash. For this to work, you must also configure your environment >> ; to allow the generation of core dumps (e.g. 'ulimit -c unlimited'). >> CoreDumpDirectory=/home/rd/rdlogs >> >> ; The name of the file to send logs to. The following wildcards can >> ; be used: >> ; %d - The day of the month (01 - 31) >> ; %h - The hour (00 - 23) >> ; %M - The month (01 - 12) >> ; %m - The minute (00 - 59) >> ; %n - The name of the originating module --e.g. 'rdairplay', 'caed'. >> ; %s - The second (00 - 60) >> ; %Y - The four digit year >> ; This parameter is used only if the 'Facility=' parameter is set to >> ; 'File'. >> LogPattern=%n-%Y%M%d.log >> >> ; Log upload/download debug data. You generally want to enable this only >> ; when debugging a specific upload/download problem, as *lots* of data >> ; can be generated. Valid arguments are 'Yes' or 'No'. >> LogXloadDebugData=No >> >> [Alsa] >> ; ALSA Parameters >> ; (It should seldom be necessary to tweak these) >> PeriodQuantity=4 >> PeriodSize=1024 >> ChannelsPerPcm=-1 >> >> ; [SoftKeys] >> ; >> ; This section can be used to program the RDSoftKeys applet, or you >> ; can use the --map-file=<filename> switch to configure multiple soft >> ; key setups on the same host. >> ; >> ; Columns=10 >> ; >> ; Command1=hithlum.srlabs.loc:GO 3 1 1 0! >> ; Legend1=Telos 1 ON >> ; Color1=red >> ; >> ; Command2=hithlum.srlabs.loc:GO 3 2 1 0! >> ; Legend2=Telos 2 ON >> ; Color2=red >> ; >> >> [Tuning] >> ; This section defines the realtime parameters used when running >> ; audio components. Normally, these are useful only for debugging. >> UseRealtime=Yes >> RealtimePriority=9 >> >> [Format] >> ; This value is used when testing and developing new features in the >> ; audio drivers. It should never be altered on a production system. >> Channels=2 >> >> [Hacks] >> ; If you are getting no output level meter indications with an older >> ; ASI card (such as the ASI4215, ASI4113 or ASI4111), try uncommenting >> ; the following line: >> ; UseStreamMeters=Yes >> >> ; Completely disable maintenance checks on this host. >> ; DisableMaintChecks=Yes >> >> ; >> ; Log Generation (old method, deprecated) >> ; >> ; These sections are here strictly for backward compatibility. See >> ; the [Logs] section for a much more powerful way to configure >> ; logging. >> ; >> ; [RDAirPlay] >> ; Logfile=/home/rd/rdairplay.log >> ; >> ; [RDCatchd] >> ; Logfile=/home/rd/rdcatchd.log >> ; >> ; [Ripcd] >> ; Logfile=/home/rd/ripcd.log >> ; >> ; [Caed] >> ; Logfile=/home/rd/caed.log >> ; EnableMixerLogging=No >> >> On 7/16/16, Wayne Merricks <[email protected]> wrote: >> > Assuming your networking is actually working and you've assigned IP >> > addresses statically (or reserved DHCP leases) all you have to do is >> > edit /etc/rd.conf to point to rdserver on every machine for the MySQL >> > database. >> > >> > You then NFS share the server's /var/snd and mount it locally on every >> > machine also to /var/snd. >> > >> > Then load up rdadmin and add a new host for each one of your machines. >> > Then either restart the daemons or restart each client and you're (in >> > theory) done. >> > >> > On 2016-07-16 00:08, Ryan Kin wrote: >> >> I just installed 1 server and 3 clients on my network. >> >> On my rdserv, I used the 2 drives 0 spare option >> >> and on my other 3 computers I used the 2nd option, the networking >> >> option >> >> How can I get my 3 PC's to network with my server easily? >> >> I tried to follow the instructions on the wikipedia website and on >> >> the >> >> form here, and I get spun around, and little do I know, my computers >> >> wont network together or anything. >> >> Anyways, without getting me confused, what do I do with setting up 1 >> >> server and 3 clients >> >> The names are as follows on my network.... rdserver, rdairone, >> >> rdprodone, rdprodtwo. >> >> Thank you!!! >> >> _______________________________________________ >> >> Rivendell-dev mailing list >> >> [email protected] >> >> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >> > >> > _______________________________________________ >> > Rivendell-dev mailing list >> > [email protected] >> > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >> > >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >> > _______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
