I use Rivendell and streaming from Securenet. I found it was pretty easy. I have their Cirrus encoder installed on a Windows 7 computer on the network. I know their system can use a generic icecast encoder, but the artist/title stuff works best with their encoder.
Go into RDAdmin, select manage hosts. Select your machine you want to stream. and go into RDAirPlay settings. Then Configure Now and Next Parameters. Under master log I entered the IP of the windows machine that's doing the encoding. I selected a UDP port (I chose 5888) I knew was open and then the UDP string is %n|%g|%h|%t|%a|%l|%y|%b%r I know some of those wildcard will allow spit out no data, but that is a known good configuration for Rivendell that Securenet uses. You just have to have Securenet set their encoder to watch the UDP port you chose. Good luck Brad On Sat, Jul 16, 2016 at 10:57 AM, Austin Moylan <[email protected]> wrote: > I'm trying to setup our Rivendell system with Securenet System's > Data Capture Software. Since the software is windows based I have it > running on our streaming PC. I just need to figure out how to send the > now playing info over to the streaming pc that's running the DCS software > so it can then be sent out to our online player. Thanks for the help! > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
