Thanks. Very helpful. I'll play with it. Tom Van Gorkom Radio Esperanza Engineering, KRIO AM/FM, KOIR FM Office: 956-380-8150 Cell: 865-803-7427
Rio Grande Bible Institute 4300 S US Hwy 281 Edinburg, TX 78539 On Thu, Oct 27, 2016 at 2:38 PM, Lorne Tyndale <[email protected]> wrote: > How you use it will depend on your setup and how you want to make things > work for your station. > > Some people will tie the on-air flag into a GPO from their console, when > the GPO triggers a GPI on Rivendell a macro sets the on-air flag to on. > > You could also set it to trigger in logs and such - for example if there > are times when your programme audio comes from a remote site (satellite, > or otherwise) you could have the log trigger to "off". It'll change the > indicator in RDAirplay (so you can visually see that it is not currently > on the air for example) and such > > Another possibility - if you have 2 studios where either one could be on > the air - you could set up macros so that when one studio is on the air > it'll toggle the flag in that studio to on-air, and the flag in the > off-air studio to off air. When you swap studios the macro will swap > the on-air flags appropriately. Then when you generate your report > you'll get what played on air regardless of which studio it came from. > > How you use it is up to you and your requirements. My best suggestion - > set up a test Rivendell installation and try various scenarios out. > > > -------- Original Message -------- > > Subject: Re: [RDD] Log report of actual played? > > From: Tom Van Gorkom <[email protected]> > > Date: Thu, October 27, 2016 2:29 pm > > To: Lorne Tyndale <[email protected]> > > Cc: ermina <[email protected]>, Rivendell-Dev > > <[email protected]> > > > > > > OK, so if that is set ON will anything that plays such as from the panel > be > > captured in the report? Or how do you use that? Sorry for the basic > > questions. > > > > Tom Van Gorkom > > Radio Esperanza Engineering, KRIO AM/FM, KOIR FM > > Office: 956-380-8150 > > Cell: 865-803-7427 > > > > Rio Grande Bible Institute > > 4300 S US Hwy 281 > > Edinburg, TX 78539 > > > > On Thu, Oct 27, 2016 at 12:29 PM, Lorne Tyndale <[email protected] > > > > wrote: > > > > > Tom, > > > > > > The "include on air events" flag will grab anything that played when > the > > > on-air flag is set to True. > > > > > > Have a look for the TA rml. > > > > > > http://rivendell.tryphon.org/wiki/Rml.sxw_-_Rivendell_ > > > Macro_Language_v1.0.0#TOGGLE_ON_AIR_FLAG > > > > > > Lorne Tyndale > > > > > > > > > > > > > Thanks. That was it. Why when I select "include only on air events - > yes" > > > > does the report not have any data? When I select "no" then it it > shows > > > > exactly what played out. I must not understand the terminology there. > > > > > > > > Tom Van Gorkom > > > > Radio Esperanza Engineering, KRIO AM/FM, KOIR FM > > > > Office: 956-380-8150 > > > > Cell: 865-803-7427 > > > > > > > > Rio Grande Bible Institute > > > > 4300 S US Hwy 281 > > > > Edinburg, TX 78539 > > > > > > > > On Thu, Oct 27, 2016 at 2:11 AM, ermina <[email protected]> > wrote: > > > > > > > > > > > > > > On 10/26/2016 11:55 PM, Tom Van Gorkom wrote: > > > > > > > > > >> With a quick try, it gives me an error > > > > >> that it's unable to open the report file. > > > > >> > > > > > > > > > > That's probably because the export path must include a filename > > > template, > > > > > in this form : /path/to/reports/%Y%m%d_report.txt > > > > > > > > > > . e > > > > > _______________________________________________ > > > > > Rivendell-dev mailing list > > > > > [email protected] > > > > > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev > > > > ><hr>_______________________________________________ > > > > Rivendell-dev mailing list > > > > [email protected] > > > > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev > > > >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
