Sorry if this is wrong.  Just a few musings over this.


1) Could you please do an aplay -l for us.

2) (this may be wrong), Rivendell does not run under the logged in user but 
under the rivendell user.  Therefore if something is under your home directory, 
it is not a system wide thing (didn't quite come out right - brain is tired).  
Therefore, you need to be running with the asound.conf file in /etc.  Have you 
tried running rdalsaconfig as a sudo user?



Probably totally the wrong direction but with a shot.



Andy







---- On Wed, 28 Feb 2018 16:06:46 +0000 Rich Gattie <mob...@gmail.com> 
wrote ----




Sorry for starting another thread.. but I have been trying to figure this out 
and it's driving me mad...





Swapped out a 64MB video card for a 1G video card which has HDMI, it took over 
the audio. I figured out it was the HDMI and blacklisted the HDMI driver in 
/etc/modprobe.d/blacklist.conf:





blacklist snd_hda_intel



Now one of my 2 Soundblasters are working.




Audigy SE (CA0106) and Audigy2 (emk10k1 I think is the driver)





Anyways, I have everything enabled in rdalsaconfig, but the asound.conf file in 
/etc is empty...





#Lines below here added for more than 1 soundcard uncomment as required







# *** Start of Rivendell configuration generated by rdalsaconfig(1) ***

# *** End of Rivendell configuration generated by rdalsaconfig(1) ***






But I have cards in the asound.conf in my home directory...



cat asound.conf

pcm.rd0 {

  type hw

  card 0

}

ctl.rd0 {

  type hw

  card 0

}



#Lines below here added for more than 1 soundcard uncomment as required

pcm.rd1 {

  type hw

  card 1

}

ctl.rd1 {

  type hw

  card 1

}



pcm.rd2 {

  type hw

  card 2

}

ctl.rd2 {

  type hw

  card 2

}



pcm.rd3 {

  type hw

  card 3

}

ctl.rd3 {

  type hw

  card 3

}






While the system sees only 1 input and 1 output on both cards, each is capable 
of multiple analouge outputs. I just cant remember how I did it and can't find 
my notes... but I digress.. 

The Audigy2 is able to play out as my stream is back up, but the SE is not 
working at all, which is the one I use in studio for production. 



Any suggestions on what I can try? Kinda feeling lost here... 



Thanks in advanced...







-- 

-=:{ Rich Gattie, Host of Geek Show Radio }:=-

-=:{ X1 - The Capital Region's Online Rock }:=-




Email: mob...@gmail.com

Blog: http://x1radio.net


Stream: http://listen.x1radio.net







_______________________________________________

Rivendell-dev mailing list 

Rivendell-dev@lists.rivendellaudio.org 

http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev 






_______________________________________________
Rivendell-dev mailing list
Rivendell-dev@lists.rivendellaudio.org
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Reply via email to