Glad you got it sorted. The same issue happened to me a while back.
The default setting on installation seems to be 48kHZ so everything will
import at that. You can also convert the files back to 44100 if you
prefer, I did that with mine as I only had a few that were at the higher
rate. I just used an external bulk converter so the filenames were the
same and I kept the original database - everything seemed to work fine
afterwards.
What can also happen is that the audio will sound slow or fast
(depending which way the audio was imported at)
On 27/11/2019 22:50, [email protected] wrote:
That seems to have been it. Except it looks like it needs to be on
48khz.....which means either my source audio was 48khz, or it accidentally
got converted when I imported it.
Not a big deal it's just a Christmas stream that's going to run for a little
over a month. Then I can take it down and fix it for next year....
If I did mess up the audio I suppose I can just reimport it and leave the
database alone?
Thanks everyone!
-----Original Message-----
From: [email protected]
<[email protected]> On Behalf Of David
Henderson
Sent: Wednesday, November 27, 2019 4:05 PM
To: [email protected]
Subject: Re: [RDD] something happened, now audio plays for a second then
white noise.
Check the soundcard settings - more than likely it's changed from 44100 to
48 kHZ (or vice-versa) in RDAdmin. Hopefully that will solve the problem.
On 27/11/2019 15:49, [email protected] wrote:
something happened, now audio plays for a second then white noise. I
must have messed something up yesterday, that didn't apply till a
reboot? We had a power outage last night and the system was running on
my test bench (NO UPS) came in this morning, rebooted, and had no
audio card. Shutdown, pulled card (Delta 1010lt), pulled the other
card that wasn't recognized by alsa (an old Lynx one, guess it really
is useless
now) Reboot, still nothing.check rdalsa config, card is there and
selected. Close out now I have a card showing up, but when I play
audio it plays for a second then white noise. I switched in a usb
lexicon alpha and the same thing is happening there..
Any Ideas? This thing was supposed to go live tomorrow at midnight..
I did have to go into alsamixer and turn up the outputs for the card
yesterday to get audio out of it, everything was turned down. It's
possible I could have fudged something up as I figured out the
navigation in the alsamixer terminal..Not sure why that would affect
the Lexicon card too though.
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
