Re: [RDD] m-audio delta410 setup

Sat, 25 Apr 2020 07:32:43 -0700

Does that card have digital and analogue breakout cables? Mine has both although I only use analogue. If you suspect the breakout cable maybe you could try different inputs if you have any spare

Sent from my BlackBerry — the most secure mobile device
Sent: 25 April 2020 15:14
Subject: Re: [RDD] m-audio delta410 setup

Yes it's seeing it. And I have it configured for playing out on AirPlay and LogEdit.
It's the inputs I can't seem to get working... but after installing Envy24Control to look directly at the soundcard I think I possibly have a bad input cable or something not right with the actual card ... more digging needed.
Thanks for the sanity check!


On Sat, Apr 25, 2020 at 9:41 AM Andy Cooper <[email protected]> wrote:
I can't point you to a guide, but I've just set up a 1010LT, which is probably similar. I found I had to go into admin > alsamixer to make sure the machine was seeing and using the card. Then you have to set up every bit of Rivendell individually, such as Airplay, Library, Catch etc to use the exact ports on the card you want. I think I got to those in the Hosts or Services settings in RD admin, but I'm not infront of the machine right now, so can't say for sure.

Andy



Sent from my BlackBerry — the most secure mobile device
Sent: 25 April 2020 14:26
Subject: [RDD] m-audio delta410 setup

I'm trying to get my m-audio delta410 configured properly so I can do voice tracking etc.
I don't seem to be able to find an "idiots guide" online for setting this card up. Any pointers?

TIA
Andrew
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Reply via email to