The Delta 410 is line level input only ... it's not switchable doh! Apparently I did not have enough coffee this morning to help work that out!
Thanks for the help, Andrew On Sat, Apr 25, 2020 at 10:37 AM Nathaniel Steele < [email protected]> wrote: > > I set up a 1010lt and had similar issues. I think what fixed it in the end > was going into alsamixer and turning up the level on all the channels. For > some reason they were all at zero. Worked after that. I think....I > definitely did get it to work though so don't give up. > > On April 25, 2020 9:32:40 AM Andy Cooper <[email protected]> wrote: > >> Does that card have digital and analogue breakout cables? Mine has both >> although I only use analogue. If you suspect the breakout cable maybe you >> could try different inputs if you have any spare >> >> Sent from my BlackBerry — the most secure mobile device >> *From:* [email protected] >> *Sent:* 25 April 2020 15:14 >> *To:* [email protected] >> *Subject:* Re: [RDD] m-audio delta410 setup >> >> Yes it's seeing it. And I have it configured for playing out on AirPlay >> and LogEdit. >> It's the inputs I can't seem to get working... but after installing >> Envy24Control to look directly at the soundcard I think I possibly have a >> bad input cable or something not right with the actual card ... more >> digging needed. >> Thanks for the sanity check! >> >> >> On Sat, Apr 25, 2020 at 9:41 AM Andy Cooper <[email protected]> >> wrote: >> >>> I can't point you to a guide, but I've just set up a 1010LT, which is >>> probably similar. I found I had to go into admin > alsamixer to make sure >>> the machine was seeing and using the card. Then you have to set up every >>> bit of Rivendell individually, such as Airplay, Library, Catch etc to use >>> the exact ports on the card you want. I think I got to those in the Hosts >>> or Services settings in RD admin, but I'm not infront of the machine right >>> now, so can't say for sure. >>> >>> Andy >>> >>> >>> >>> Sent from my BlackBerry — the most secure mobile device >>> *From:* [email protected] >>> *Sent:* 25 April 2020 14:26 >>> *To:* [email protected] >>> *Subject:* [RDD] m-audio delta410 setup >>> >>> I'm trying to get my m-audio delta410 configured properly so I can do >>> voice tracking etc. >>> I don't seem to be able to find an "idiots guide" online for setting >>> this card up. Any pointers? >>> >>> TIA >>> Andrew >>> >> >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
