hi dave,
thanks for your input. unforch, each time lizard freezes/crashes/fails
i need a copy of your /tmp/lizard.log in order to figure out what
happened. you can get to a shell in VC2 and log in as root; then mcopy
/tmp/lizard.log a: and hit enter. you will need a floppy in the floppy
drive.
if you just try it again, it doesn't help me or you because the bug(s)
you find will still be in future builds. when you find a bug, i need
you to document it before you go on.
[EMAIL PROTECTED] wrote:
> hey Joe got the disk in the mail today. so i tryied to load it up,
> my computer is a little tricky so I had to do it a few times. (it
> likes to freeze up alot)well here's what I did. chose the first type
> of instalationwent through check pointsstarting LIZARD- took a long
> time..never got to load-----------------------------------------2nd
> trysave VGA modeskipped floppyload from
> lizard...failed____________________________3rd trytried with out
> probing hard wareskiped floppy (now it did that every time does it not
> see the floppy, or is it normal to skip it?)got to start
> LIZARD...failed___________________________________4th tryfirst type of
> instalation againthis time it STARTED LOADINGgot the big white square
> for mouse again(like on previous build)worked finegot to choose
> monitor-still didn't find mine MAXTECH XT-5800 (so I chose the closest
> one)set resolution800X600 60 KHZlooked great. changed the white mouse
> block to an X :)entered password and usernamestopped loading at
> 59%____________________________________________5th try1st instalation
> choicegot to setup lizard.... fail__________________________6th try1st
> instalation choiceloaded uploaded fine till probing monitordidn't test
> monitor so i still had the white squarecouldn't put in user name and
> password with mouse so I had to use the Key board and TAB to the
> different fields.tried to choose my modem, VIKING was not there. chose
> Hayes standard with rockwell chipsetchose and tested the printer
> konika LP-3110 (HP laser jet 2 emulation) it took a long time,(2
> minutes) but it finally printed out a test pagegot to the game (I
> liked packman better)had to go away from the computer for a little
> whilewhen I came back the instalation stopped at 90%waited about 10
> minutes and it never finnished.(i like the status bar on all the
> packages it's loading, so if it looks like it's stopped, you still
> have a bar showing it's loading a big package)so i'm impatient.. I
> will try again today Dave
--
thanks!
joe
--
Joseph Cheek, Sr Linux Consultant, Linuxcare | http://www.linuxcare.com/
Linuxcare. Support for the Revolution. | [EMAIL PROTECTED]
PM and Lead Dev, Redmond Linux Project | [EMAIL PROTECTED]
425 990-1072 vox [1074 fax] 206 679-6838 pcs | [EMAIL PROTECTED]
