if it's a hardware modem, it might already be working - you can check go > internet > connect via modem and then setup > modem > query modem.
if it's an isapnp modem, we're working to fix it. On Sun, 14 Oct 2001, Lee Chapelle wrote: > I just set up rl for the first time. I have a USR 56k modem and rl didn't recognize >it. I'm very > impressed with rl otherwise! I'm not too familiar with linux so I'm pleased setup is >so simple and > operation is very very quick compared to Msoft stuff, but I don't know how to >approach the modem not > working... > > Lee > > ----- Original Message ----- > From: "Fred Schuchart" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Sunday, October 14, 2001 7:03 PM > Subject: [rl-users] US Robotics 56K Int PnP Modem > > > I installed Build 40, RC1 and everything went fine. The only problem was > that the installation didn't set up my US Robotics PnP Modem - even though > I had the PnP turned off in the Bios. This was the first time this has > happened - I was always surprised with RL because it did install it > correctly in the past builds. This was the only Linux distribution that I > found that would do it right from the installation - and it spoiled me. > > Subsequently I have tried getting it working with isapnp and setserial and > am having a hard time getting it to work. Anyone have similar problems, > and been able to get the modem working. > > Joseph - any suggestions? > > Fred > > - > -- > rl-users list. To leave, send "unsubscribe" without quotes in body of > message to [EMAIL PROTECTED] > Archive: http://www.mail-archive.com/rl-users@chicago.redmondlinux.org/ > > - > -- > rl-users list. To leave, send "unsubscribe" without quotes in body of > message to [EMAIL PROTECTED] > Archive: http://www.mail-archive.com/rl-users@chicago.redmondlinux.org/ > - -- rl-users list. To leave, send "unsubscribe" without quotes in body of message to [EMAIL PROTECTED] Archive: http://www.mail-archive.com/rl-users@chicago.redmondlinux.org/
