Am un computer cu placa de baza Intel SE7230NH1, rulind Centos 4 cu
kernel 2.6.9-34.0.2.ELsmp, care la lspci zice asa:
db2 ~ # lspci
00:00.0 Host bridge: Intel Corporation E7230 Memory Controller Hub
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
03:00.0 Ethernet controller: Intel Corporation 82573V Gigabit Ethernet
Controller (Copper) (rev 03)
04:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
04:05.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit
Ethernet Controller (rev 05)
Dupa actualizarea lui lm_sensors la versiunea 2.10.0, finalul lui
sensors-detect este:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `lm85' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x2e
Chip `SMSC EMC6D100, EMC6D101 or EMC6D102' (confidence: 7)
Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 3000'
Busdriver `i2c-i801', I2C address 0x52
Chip `SPD EEPROM' (confidence: 8)
Problema e ca la comanda sensors, raspunde:
# sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
Evident, /proc si /sys sint la locul lor.
Din cite mi-a zis google, mesajul asta de eroare apare cind de fapt nu vede
senzorii.
Daca a reusit cineva sa vada senzorii pe o astfel de placa, il rog sa imi spuna
si mie cu ce kernel/versiune de lm-sensors/setari
tia
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
