On Thu, 2007-11-08 at 19:06 +0200, Dan Uscatu wrote:
> Salut
>
> Simt ca innebunesc. Am un sistem cu o placa de retea onboard (via rhine)
> si una pe pci (3c905b).
> La reboot, placa 3com dispare. Adica:
>
> [EMAIL PROTECTED] ~]# lspci | grep Eth
> 00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
> (rev 30)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
> (rev 74)
>
> [EMAIL PROTECTED] ~]# dmesg | grep 3c
> 3c59x: Donald Becker and others.
> 0000:00:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at e08b6f80.
>
> [EMAIL PROTECTED] ~]# dmesg | grep eth
> eth1: VIA Rhine II at 0xdffffd00, 00:0b:6a:6c:95:6e, IRQ 18.
> eth1: MII PHY found at address 1, status 0x7869 advertising 05e1 Link
> 41e1.
> eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
> eth1: no IPv6 routers present
>
> Despre eth0, nimic. Alte chestii pe care le-am facut:
>
> [EMAIL PROTECTED] ~]# ifup eth0
> 3c59x device eth0 does not seem to be present, delaying initialization.
>
> [EMAIL PROTECTED] ~]# cat /etc/modprobe.conf | grep eth
> alias eth0 3c59x
> alias eth1 via-rhine
>
> [EMAIL PROTECTED] ~]# cat /etc/udev/rules.d/010_netinterfaces.rules
> KERNEL=="eth*", SYSFS{address}=="00:01:02:AE:6C:37", NAME="eth0"
> KERNEL=="eth*", SYSFS{address}=="00:03:47:D6:6B:D2", NAME="eth1"
>
> Macurile sint puse si in ifcfg-eth*.
> Ei bine, totul are loc aleator. Daca rebootez de citeva ori, apare si
> eth0. Citeodata e nevoie sa scot si cablul de alimentare pentru citeva
> minute, dar in final tot apare.
>
> Wtf ?! Cum fac sa am eth0 si eth1 corect si de fiecare data ?
> Multumesc
>
> ----
> - Where is Spiderman ?
> - He quit.
>
>
>
> _______________________________________________
> RLUG mailing list
> [email protected]
> http://lists.lug.ro/mailman/listinfo/rlug
si eu am patit asa ceva tot cu un 3c59x dar dupa ce restartam din
windows ca sa bootez Fedora ..explicatia gasita pe net era ca la
shutdown de windows Realtek-ul era inchis iar fedora nu mai era in stare
sa-l ridice......remediul fiind shutdown, nu restart, pauza cca 10 sec
iar apoi boot fedora............
_______________________________________________
RLUG mailing list
[email protected]
http://lists.lug.ro/mailman/listinfo/rlug
