Ieri la pornirea unui sistem am primit doua e-mail-uri de la Smartd ca a avut o eroare de citire pe cite un disc . Discurile sunt parti a unei matrici raid 5 cu 4 discuri .
Azi am rulat un test scurt de citeva ori . Rezultatul este mai jos . Discurile nu au sectoare realocate inca . Ce sa fac sa le schimb pe cele doua ? > [root@datavault ~]# smartctl -a /dev/sde > smartctl 5.43 2012-06-30 r3573 > [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Model Family: SAMSUNG SpinPoint F3 > Device Model: SAMSUNG HD103SJ > Serial Number: S246J9EZ913102 > LU WWN Device Id: 5 0024e9 2035d63b1 > Firmware Version: 1AJ10001 > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Device is: In smartctl database [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 6 > Local Time is: Mon Mar 10 14:17:07 2014 EET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 121) The previous self-test > completed having > the read element of the test > failed. > Total time to complete Offline > data collection: ( 9060) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection > on/off support. > Suspend Offline collection > upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 151) minutes. > SCT capabilities: (0x003f) SCT Status supported. > SCT Error Recovery Control > supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail > Always - 2395 > 2 Throughput_Performance 0x0026 252 252 000 Old_age > Always - 0 > 3 Spin_Up_Time 0x0023 071 070 025 Pre-fail > Always - 9066 > 4 Start_Stop_Count 0x0032 096 096 000 Old_age > Always - 4149 > 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail > Always - 0 > 7 Seek_Error_Rate 0x002e 252 252 051 Old_age > Always - 0 > 8 Seek_Time_Performance 0x0024 252 252 015 Old_age > Offline - 0 > 9 Power_On_Hours 0x0032 100 100 000 Old_age > Always - 26760 > 10 Spin_Retry_Count 0x0032 252 252 051 Old_age > Always - 0 > 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age > Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age > Always - 100 > 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age > Always - 0 > 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age > Always - 0 > 194 Temperature_Celsius 0x0002 063 052 000 Old_age > Always - 37 (Min/Max 17/48) > 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age > Always - 0 > 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age > Always - 0 > 197 Current_Pending_Sector 0x0032 100 100 000 Old_age > Always - 1 > 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age > Offline - 0 > 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age > Always - 0 > 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age > Always - 211 > 223 Load_Retry_Count 0x0032 252 252 000 Old_age > Always - 0 > 225 Load_Cycle_Count 0x0032 100 100 000 Old_age > Always - 4154 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Short offline Completed: read failure 90% 26760 > 1524945465 > # 2 Short offline Completed: read failure 90% 26759 > 1524945465 > # 3 Short offline Completed without error 00% 26759 - > > Note: selective self-test log revision number (0) not 1 implies that > no selective self-test has ever been run > SMART Selective self-test log data structure revision number 0 > Note: revision number not 1 implies that no selective self-test has > ever been run > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Completed_read_failure [90% left] (0-65535) > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute > delay. Celalalt disc cu probleme > [root@datavault ~]# smartctl -a /dev/sdc > smartctl 5.43 2012-06-30 r3573 > [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Model Family: SAMSUNG SpinPoint F3 > Device Model: SAMSUNG HD103SJ > Serial Number: S246J9EZ913085 > LU WWN Device Id: 5 0024e9 2035d61ca > Firmware Version: 1AJ10001 > User Capacity: 1,000,203,804,160 bytes [1.00 TB] > Sector Size: 512 bytes logical/physical > Device is: In smartctl database [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 6 > Local Time is: Mon Mar 10 14:22:59 2014 EET > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test > has ever > been run. > Total time to complete Offline > data collection: ( 9360) seconds. > Offline data collection > capabilities: (0x5b) SMART execute Offline immediate. > Auto Offline data collection > on/off support. > Suspend Offline collection > upon new > command. > Offline surface scan supported. > Self-test supported. > No Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 156) minutes. > SCT capabilities: (0x003f) SCT Status supported. > SCT Error Recovery Control > supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail > Always - 3972 > 2 Throughput_Performance 0x0026 252 252 000 Old_age > Always - 0 > 3 Spin_Up_Time 0x0023 070 070 025 Pre-fail > Always - 9172 > 4 Start_Stop_Count 0x0032 097 097 000 Old_age > Always - 3776 > 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail > Always - 0 > 7 Seek_Error_Rate 0x002e 252 252 051 Old_age > Always - 0 > 8 Seek_Time_Performance 0x0024 252 252 015 Old_age > Offline - 0 > 9 Power_On_Hours 0x0032 100 100 000 Old_age > Always - 26759 > 10 Spin_Retry_Count 0x0032 252 252 051 Old_age > Always - 0 > 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age > Always - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age > Always - 100 > 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age > Always - 1 > 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age > Always - 0 > 194 Temperature_Celsius 0x0002 057 045 000 Old_age > Always - 43 (Min/Max 18/55) > 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age > Always - 0 > 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age > Always - 0 > 197 Current_Pending_Sector 0x0032 100 100 000 Old_age > Always - 1 > 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age > Offline - 0 > 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age > Always - 0 > 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age > Always - 1564 > 223 Load_Retry_Count 0x0032 252 252 000 Old_age > Always - 0 > 225 Load_Cycle_Count 0x0032 100 100 000 Old_age > Always - 3781 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Short offline Completed without error 00% 26759 - > # 2 Short offline Completed: read failure 90% 26758 > 1598620948 > > Note: selective self-test log revision number (0) not 1 implies that > no selective self-test has ever been run > SMART Selective self-test log data structure revision number 0 > Note: revision number not 1 implies that no selective self-test has > ever been run > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Completed [00% left] (0-65535) > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute > delay. > Paul _______________________________________________ RLUG mailing list [email protected] http://lists.lug.ro/mailman/listinfo/rlug
