On 03/10/2014 02:24 PM, Paul Lacatus (Personal) wrote: > Ieri la pornirea unui sistem am primit doua e-mail-uri de la Smartd ca > a avut o eroare de citire pe cite un disc . Discurile sunt parti a unei > matrici raid 5 cu 4 discuri . > > Azi am rulat un test scurt de citeva ori . Rezultatul este mai jos . > Discurile nu au sectoare realocate inca . Ce sa fac sa le schimb pe > cele doua ? varianta cea mai buna e sa folosesti SeaTools ( pt DOS sau Windows.. gasesti utilitarul si in ubcd for dos ) si sa ii dai sa testeze si repare. alternativ poti urma procedura de la http://smartmontools.sourceforge.net/badblockhowto.html#bb dar e mai laborios
>> [root@datavault ~]# smartctl -a /dev/sde >> smartctl 5.43 2012-06-30 r3573 >> [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build) >> Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net >> >> === START OF INFORMATION SECTION === >> Model Family: SAMSUNG SpinPoint F3 >> Device Model: SAMSUNG HD103SJ >> Serial Number: S246J9EZ913102 >> LU WWN Device Id: 5 0024e9 2035d63b1 >> Firmware Version: 1AJ10001 >> User Capacity: 1,000,204,886,016 bytes [1.00 TB] >> Sector Size: 512 bytes logical/physical >> Device is: In smartctl database [for details use: -P show] >> ATA Version is: 8 >> ATA Standard is: ATA-8-ACS revision 6 >> Local Time is: Mon Mar 10 14:17:07 2014 EET >> SMART support is: Available - device has SMART capability. >> SMART support is: Enabled >> >> === START OF READ SMART DATA SECTION === >> SMART overall-health self-assessment test result: PASSED >> >> General SMART Values: >> Offline data collection status: (0x00) Offline data collection activity >> was never started. >> Auto Offline Data Collection: >> Disabled. >> Self-test execution status: ( 121) The previous self-test >> completed having >> the read element of the test >> failed. >> Total time to complete Offline >> data collection: ( 9060) seconds. >> Offline data collection >> capabilities: (0x5b) SMART execute Offline immediate. >> Auto Offline data collection >> on/off support. >> Suspend Offline collection >> upon new >> command. >> Offline surface scan supported. >> Self-test supported. >> No Conveyance Self-test supported. >> Selective Self-test supported. >> SMART capabilities: (0x0003) Saves SMART data before entering >> power-saving mode. >> Supports SMART auto save timer. >> Error logging capability: (0x01) Error logging supported. >> General Purpose Logging supported. >> Short self-test routine >> recommended polling time: ( 2) minutes. >> Extended self-test routine >> recommended polling time: ( 151) minutes. >> SCT capabilities: (0x003f) SCT Status supported. >> SCT Error Recovery Control >> supported. >> SCT Feature Control supported. >> SCT Data Table supported. >> >> SMART Attributes Data Structure revision number: 16 >> Vendor Specific SMART Attributes with Thresholds: >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >> UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail >> Always - 2395 >> 2 Throughput_Performance 0x0026 252 252 000 Old_age >> Always - 0 >> 3 Spin_Up_Time 0x0023 071 070 025 Pre-fail >> Always - 9066 >> 4 Start_Stop_Count 0x0032 096 096 000 Old_age >> Always - 4149 >> 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail >> Always - 0 >> 7 Seek_Error_Rate 0x002e 252 252 051 Old_age >> Always - 0 >> 8 Seek_Time_Performance 0x0024 252 252 015 Old_age >> Offline - 0 >> 9 Power_On_Hours 0x0032 100 100 000 Old_age >> Always - 26760 >> 10 Spin_Retry_Count 0x0032 252 252 051 Old_age >> Always - 0 >> 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age >> Always - 100 >> 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age >> Always - 0 >> 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age >> Always - 0 >> 194 Temperature_Celsius 0x0002 063 052 000 Old_age >> Always - 37 (Min/Max 17/48) >> 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age >> Always - 0 >> 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 197 Current_Pending_Sector 0x0032 100 100 000 Old_age >> Always - 1 >> 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age >> Offline - 0 >> 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age >> Always - 0 >> 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age >> Always - 211 >> 223 Load_Retry_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 225 Load_Cycle_Count 0x0032 100 100 000 Old_age >> Always - 4154 >> >> SMART Error Log Version: 1 >> No Errors Logged >> >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining LifeTime(hours) >> LBA_of_first_error >> # 1 Short offline Completed: read failure 90% 26760 >> 1524945465 >> # 2 Short offline Completed: read failure 90% 26759 >> 1524945465 >> # 3 Short offline Completed without error 00% 26759 - >> >> Note: selective self-test log revision number (0) not 1 implies that >> no selective self-test has ever been run >> SMART Selective self-test log data structure revision number 0 >> Note: revision number not 1 implies that no selective self-test has >> ever been run >> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> 1 0 0 Completed_read_failure [90% left] (0-65535) >> 2 0 0 Not_testing >> 3 0 0 Not_testing >> 4 0 0 Not_testing >> 5 0 0 Not_testing >> Selective self-test flags (0x0): >> After scanning selected spans, do NOT read-scan remainder of disk. >> If Selective self-test is pending on power-up, resume after 0 minute >> delay. > Celalalt disc cu probleme > >> [root@datavault ~]# smartctl -a /dev/sdc >> smartctl 5.43 2012-06-30 r3573 >> [x86_64-linux-2.6.32-431.5.1.el6.x86_64] (local build) >> Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net >> >> === START OF INFORMATION SECTION === >> Model Family: SAMSUNG SpinPoint F3 >> Device Model: SAMSUNG HD103SJ >> Serial Number: S246J9EZ913085 >> LU WWN Device Id: 5 0024e9 2035d61ca >> Firmware Version: 1AJ10001 >> User Capacity: 1,000,203,804,160 bytes [1.00 TB] >> Sector Size: 512 bytes logical/physical >> Device is: In smartctl database [for details use: -P show] >> ATA Version is: 8 >> ATA Standard is: ATA-8-ACS revision 6 >> Local Time is: Mon Mar 10 14:22:59 2014 EET >> SMART support is: Available - device has SMART capability. >> SMART support is: Enabled >> >> === START OF READ SMART DATA SECTION === >> SMART overall-health self-assessment test result: PASSED >> >> General SMART Values: >> Offline data collection status: (0x00) Offline data collection activity >> was never started. >> Auto Offline Data Collection: >> Disabled. >> Self-test execution status: ( 0) The previous self-test routine >> completed >> without error or no self-test >> has ever >> been run. >> Total time to complete Offline >> data collection: ( 9360) seconds. >> Offline data collection >> capabilities: (0x5b) SMART execute Offline immediate. >> Auto Offline data collection >> on/off support. >> Suspend Offline collection >> upon new >> command. >> Offline surface scan supported. >> Self-test supported. >> No Conveyance Self-test supported. >> Selective Self-test supported. >> SMART capabilities: (0x0003) Saves SMART data before entering >> power-saving mode. >> Supports SMART auto save timer. >> Error logging capability: (0x01) Error logging supported. >> General Purpose Logging supported. >> Short self-test routine >> recommended polling time: ( 2) minutes. >> Extended self-test routine >> recommended polling time: ( 156) minutes. >> SCT capabilities: (0x003f) SCT Status supported. >> SCT Error Recovery Control >> supported. >> SCT Feature Control supported. >> SCT Data Table supported. >> >> SMART Attributes Data Structure revision number: 16 >> Vendor Specific SMART Attributes with Thresholds: >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >> UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail >> Always - 3972 >> 2 Throughput_Performance 0x0026 252 252 000 Old_age >> Always - 0 >> 3 Spin_Up_Time 0x0023 070 070 025 Pre-fail >> Always - 9172 >> 4 Start_Stop_Count 0x0032 097 097 000 Old_age >> Always - 3776 >> 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail >> Always - 0 >> 7 Seek_Error_Rate 0x002e 252 252 051 Old_age >> Always - 0 >> 8 Seek_Time_Performance 0x0024 252 252 015 Old_age >> Offline - 0 >> 9 Power_On_Hours 0x0032 100 100 000 Old_age >> Always - 26759 >> 10 Spin_Retry_Count 0x0032 252 252 051 Old_age >> Always - 0 >> 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age >> Always - 100 >> 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age >> Always - 1 >> 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age >> Always - 0 >> 194 Temperature_Celsius 0x0002 057 045 000 Old_age >> Always - 43 (Min/Max 18/55) >> 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age >> Always - 0 >> 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 197 Current_Pending_Sector 0x0032 100 100 000 Old_age >> Always - 1 >> 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age >> Offline - 0 >> 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age >> Always - 0 >> 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age >> Always - 1564 >> 223 Load_Retry_Count 0x0032 252 252 000 Old_age >> Always - 0 >> 225 Load_Cycle_Count 0x0032 100 100 000 Old_age >> Always - 3781 >> >> SMART Error Log Version: 1 >> No Errors Logged >> >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining LifeTime(hours) >> LBA_of_first_error >> # 1 Short offline Completed without error 00% 26759 - >> # 2 Short offline Completed: read failure 90% 26758 >> 1598620948 >> >> Note: selective self-test log revision number (0) not 1 implies that >> no selective self-test has ever been run >> SMART Selective self-test log data structure revision number 0 >> Note: revision number not 1 implies that no selective self-test has >> ever been run >> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> 1 0 0 Completed [00% left] (0-65535) >> 2 0 0 Not_testing >> 3 0 0 Not_testing >> 4 0 0 Not_testing >> 5 0 0 Not_testing >> Selective self-test flags (0x0): >> After scanning selected spans, do NOT read-scan remainder of disk. >> If Selective self-test is pending on power-up, resume after 0 minute >> delay. >> > Paul > _______________________________________________ > RLUG mailing list > [email protected] > http://lists.lug.ro/mailman/listinfo/rlug _______________________________________________ RLUG mailing list [email protected] http://lists.lug.ro/mailman/listinfo/rlug
