Mihai Ichim wrote:
>
> Buna,
>
> Am o problema cu o placa SMC 1211 si anume:
>
> ~#modprobe 8139too
> Sep 4 20:17:15 blank kernel: 8139too Fast Ethernet driver 0.9.18a
> Sep 4 20:17:15 blank kernel: PCI: Found IRQ 10 for device 00:0b.0
> Sep 4 20:17:15 blank kernel: PCI: Sharing IRQ 10 with 00:07.2
> Sep 4 20:17:15 blank kernel: PCI: Sharing IRQ 10 with 00:07.3
> Sep 4 20:17:15 blank kernel: Assertion failed! ioaddr !=
> NULL,8139too.c,rtl8139_init_one,line=944
> Sep 4 20:17:15 blank kernel: eth3: SMC1211TX EZCard 10/100 (RealTek RTL8139)
> at 0xc400, ff:ff:ff:ff:ff:ff, IRQ 10
> Sep 4 20:17:15 blank kernel: eth3: Identified 8139 chip type 'RTL-8139C'
>
> ~#ifup eth3
> Sep 4 20:17:15 blank kernel: 8139too Fast Ethernet driver 0.9.18a
> Sep 4 20:17:15 blank kernel: PCI: Found IRQ 10 for device 00:0b.0
> Sep 4 20:17:15 blank kernel: PCI: Sharing IRQ 10 with 00:07.2
> Sep 4 20:17:15 blank kernel: PCI: Sharing IRQ 10 with 00:07.3
> Sep 4 20:17:15 blank kernel: Assertion failed! ioaddr !=
> NULL,8139too.c,rtl8139_init_one,line=944
> Sep 4 20:17:15 blank kernel: eth3: SMC1211TX EZCard 10/100 (RealTek RTL8139)
> at 0xc400, ff:ff:ff:ff:ff:ff, IRQ 10
> Sep 4 20:17:15 blank kernel: eth3: Identified 8139 chip type 'RTL-8139C'
> Sep 4 20:17:42 blank kernel: eth3: Setting 100mbps half-duplex based on
> auto-negotiated partner ability ffff.
> Sep 4 20:17:42 blank kernel: probable hardware bug: clock timer configuration
> lost - probably a VIA686a motherboard.
> Sep 4 20:17:42 blank kernel: probable hardware bug: restoring chip
> configuration.
> Sep 4 20:17:54 blank kernel: NETDEV WATCHDOG: eth3: transmit timed out
> Sep 4 20:17:54 blank kernel: eth3: Tx queue start entry 4 dirty entry 0.
> Sep 4 20:17:54 blank kernel: eth3: Tx descriptor 0 is ffffffff. (queue head)
> Sep 4 20:17:54 blank kernel: eth3: Tx descriptor 1 is ffffffff.
> Sep 4 20:17:54 blank kernel: eth3: Tx descriptor 2 is ffffffff.
> Sep 4 20:17:54 blank kernel: eth3: Tx descriptor 3 is ffffffff.
> Sep 4 20:17:54 blank kernel: eth3: Setting 100mbps half-duplex based on
> auto-negotiated partner ability ffff.
>
> Am incercat sa o pun default pe 10 Half Duplex da nimic acelasi lucru. Acelasi
> lucru se intimpla si cu Autoproble
>
> Exista cumva alti parametri la modprobe prin care sa ii spun sa mearga la 10
> nu la 100 ?
>
> Personal am cautat prin /usr/src/linux/Documentation/* si pe net da nu am
> gasit nimic care sa ma ajute.
>
la modprobe nu cred, dar poti cu "ifconfig <interface> media
10baseT/UTP"
Camelia
--
Camelia Nastase, [EMAIL PROTECTED]
Network Administrator
Dynamic Network Technologies, Romania
Tel: +40-1-2106863 Fax: +40-1-3122745
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
