HI!
Se da urmatorul HDD:
hdparm -i /dev/hda:
/dev/hda:
Model=Maxtor 34098H4, FwRev=YAH814Y0, SerialNo=L40GKHSC
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=80043264
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5
hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
I/O support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 4982/255/63, sectors = 80043264, start = 0
Asta e comanda care o lansez din rc.local:
/sbin/hdparm -c 1 -u 1 -W 1 -d1 -X34 -m 16 /dev/hda
Am incercat X66 si X67 dar mi s-a shocat servu' ...
Problema mea este ca nu pot sa stor din HDDul ala mai mult de:
hdparm -tT /dev/hda
/dev/hda:
Timing buffer-cache reads: 128 MB in 0.82 seconds =156.10 MB/sec
Timing buffered disk reads: 64 MB in 21.50 seconds = 2.98 MB/sec
Ce parere aveti. HDDul e un Maxtor de 4 luni de zile 40GB ... nu e ceva
vechi si suporta ATA 100 ... clabul la fel, placa la fel. Ce pot sa-i fac?
Thanx,
Cosmin
--
"Alexandru Papiu Ilarian" Highschool Dej - RoEduNet POP in Dej
e-mail: <[EMAIL PROTECTED]>
phone: +40-93.514.225 (personal)
It's nice to be important
But is more important to be nice
---
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
