Doom wrote:
> HI!
>
> Se da urmatorul HDD:
>
> hdparm -i /dev/hda:
>
> /dev/hda:
>
> Model=Maxtor 34098H4, FwRev=YAH814Y0, SerialNo=L40GKHSC
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
> BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=-66060037, LBA=yes, LBAsects=80043264
> IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 *mdma2 udma0 udma1 udma2 udma3 udma4 udma5
>
> hdparm /dev/hda
>
> /dev/hda:
> multcount = 16 (on)
> I/O support = 1 (32-bit)
> unmaskirq = 1 (on)
> using_dma = 1 (on)
> keepsettings = 0 (off)
> nowerr = 0 (off)
> readonly = 0 (off)
> readahead = 8 (on)
> geometry = 4982/255/63, sectors = 80043264, start = 0
>
> Asta e comanda care o lansez din rc.local:
> /sbin/hdparm -c 1 -u 1 -W 1 -d1 -X34 -m 16 /dev/hda
X34 te tine in ATA33. normal ar fi X69 (udma5)
> Am incercat X66 si X67 dar mi s-a shocat servu' ...
e ceva in neregula cu domnul kernel sau cu domnul controler HDD
> Problema mea este ca nu pot sa stor din HDDul ala mai mult de:
>
> hdparm -tT /dev/hda
>
> /dev/hda:
> Timing buffer-cache reads: 128 MB in 0.82 seconds =156.10 MB/sec
> Timing buffered disk reads: 64 MB in 21.50 seconds = 2.98 MB/sec
>
> Ce parere aveti. HDDul e un Maxtor de 4 luni de zile 40GB ... nu e ceva
> vechi si suporta ATA 100 ... clabul la fel, placa la fel. Ce pot sa-i fac?
arunca-le. dar zi-mi mie intii unde :)
---
Send e-mail to '[EMAIL PROTECTED]' with 'unsubscribe rlug' to
unsubscribe from this list.
