zice ceva de gen-ul
/dev/hda:
Model=Maxtor 6E020L0, FwRev=NAR61590, SerialNo=E16XR5NE
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=40718160
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): 1 2 3 4 5 6 7
----- Original Message -----
From: "ghrt" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 24, 2003 2:15 AM
Subject: [rlug] Re: hdparm
> hdparm -i /dev/hda ce zice?
>
> Pe data de Lun 23 Iun 2003 20:05, a-=C5=A3i scris:
> > Hello,
> > Pe server am 3 hdd-uri 2 * Maxtor 6E020L0 (20gb) si 1 * Maxtor 6E040L0,
> > pana aici toate bune si frumoase :). Citeam si eu azi "promema cu
> > kernel...." si am dat de proba un hdparm -tT /dev/hda si am ramas
uimit...
> > cam asa arata ce am primit. /dev/hda:
> > Timing buffer-cache reads: 128 MB in 1.00 seconds =3D128.00 MB/sec
> > Timing buffered disk reads: 64 MB in 23.13 seconds =3D 2.77 MB/sec
> > Server-ul este un p3 la 1133 cu 1024 ram... Din aceasta cauza merge
tot-ul
> > prost... o rezolvare ? (fara reboot daca se poate)
>
>
