Pe data de Lun 23 Iun 2003 20:16, a-=C5=A3i scris:
> zice ceva de gen-ul
> /dev/hda:
>
> Model=3DMaxtor 6E020L0, FwRev=3DNAR61590, SerialNo=3DE16XR5NE
> Config=3D{ Fixed }
> RawCHS=3D16383/16/63, TrkSize=3D0, SectSize=3D0, ECCbytes=3D57
> BuffType=3DDualPortCache, BuffSize=3D2048kB, MaxMultSect=3D16, MultSect=
=3D16
> CurCHS=3D16383/16/63, CurSects=3D16514064, LBA=3Dyes, LBAsects=3D40718160
> IORDY=3Don/off, tPIO=3D{min:120,w/IORDY:120}, tDMA=3D{min:120,rec:120}
> PIO modes: pio0 pio1 pio2 pio3 pio4
> DMA modes: mdma0 mdma1 mdma2
> UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma6
*udma5 inseamna ATA133
> AdvancedPM=3Dyes: disabled (255) WriteCache=3Denabled
> Drive conforms to: (null): 1 2 3 4 5 6 7
(null) este chiar ciudat. Ar tb sa fie ATAPI-5 (la mine cu udma100 e ATAPI4)
pe celelalte harduri ce zice? sau sunt in raid ceva?
>
> ----- Original Message -----
> From: "ghrt" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, June 24, 2003 2:15 AM
> Subject: [rlug] Re: hdparm
>
> > hdparm -i /dev/hda ce zice?
> >
> > Pe data de Lun 23 Iun 2003 20:05, a-=3DC5=3DA3i scris:
> > > Hello,
> > > Pe server am 3 hdd-uri 2 * Maxtor 6E020L0 (20gb) si 1 * Maxtor 6E040L=
0,
> > > pana aici toate bune si frumoase :). Citeam si eu azi "promema cu
> > > kernel...." si am dat de proba un hdparm -tT /dev/hda si am ramas
>
> uimit...
>
> > > cam asa arata ce am primit. /dev/hda:
> > > Timing buffer-cache reads: 128 MB in 1.00 seconds =3D3D128.00 MB/=
sec
> > > Timing buffered disk reads: 64 MB in 23.13 seconds =3D3D 2.77 MB/s=
ec
> > > Server-ul este un p3 la 1133 cu 1024 ram... Din aceasta cauza merge
>
> tot-ul
>
> > > prost... o rezolvare ? (fara reboot daca se poate)
