Guess it depends on your distro ;) What distro are you running?
- Sebastian
On Thu, 19 Jan 2006, Brian Morris wrote:
Rather than /dev/sd* it should mount as a USB device like /dev/ttyUSB0
or /dev/ttyUSB1. You can always watch the output of 'dmesg' to see how
it mounts when you plug it in and hit its sync button.
Brian
On Thu, 2006-01-19 at 12:41 -0800, Sebastian Smith wrote:
Dennis,
My guess is that is would show up as /dev/sd[a-z]. The problem is -- if
the device is not removed from the system properly the letter could
change, so hard coding sometimes causes problems.
I've never synced a PDA in Linux, so I can't offer much assistance ;)
- Sebastian
On Thu, 19 Jan 2006, Dennis Bagley wrote:
Hey folks.
Since I upgraded to Ubuntu 5.1 (Breezy) I have not been able to sync my
Sony Clie PDA.
It plugs into a usb port with a funky little cable.
Under VMWare with Win2K I can see the device but not sync.
I'm unsure of what the dev name / path should be on the configuration on
the Linux side.
Any ideas?
Dennis
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
