When I look in /dev I have sda(-,1,2,5) and ditto for sdb
Brian: When I look in /dev there is no ttyUSB* until I try to Hotsync then I get BOTH
ttyUSB0 and ttyUSB1 !!!???? Do not understand why both pop up.
HOWEVER - Forgot about the hotplug concept with USB. When I change kpilot settings to look for a device /dev/ttyUSB0
it worked (On the Linux side at least) Thanks!
NOW though I'm detecting a new and different problem: when I looked at dmesg I'm getting
sr0: CDROM not ready. blah blah
And that error is showing over and over. What's that about?
Dennis
On Thu, 2006-01-19 at 17:43 -0800, Sebastian Smith wrote:
Guess it depends on your distro ;) What distro are you running? - Sebastian On Thu, 19 Jan 2006, Brian Morris wrote: > Rather than /dev/sd* it should mount as a USB device like /dev/ttyUSB0 > or /dev/ttyUSB1. You can always watch the output of 'dmesg' to see how > it mounts when you plug it in and hit its sync button. > > Brian > > On Thu, 2006-01-19 at 12:41 -0800, Sebastian Smith wrote: > >> Dennis, >> >> My guess is that is would show up as /dev/sd[a-z]. The problem is -- if >> the device is not removed from the system properly the letter could >> change, so hard coding sometimes causes problems. >> >> I've never synced a PDA in Linux, so I can't offer much assistance ;) >> >> - Sebastian >> >> >> On Thu, 19 Jan 2006, Dennis Bagley wrote: >> >>> Hey folks. >>> >>> Since I upgraded to Ubuntu 5.1 (Breezy) I have not been able to sync my >>> Sony Clie PDA. >>> >>> It plugs into a usb port with a funky little cable. >>> >>> Under VMWare with Win2K I can see the device but not sync. >>> >>> I'm unsure of what the dev name / path should be on the configuration on >>> the Linux side. >>> >>> Any ideas? >>> >>> >>> Dennis >>> >> >> _______________________________________________ >> RLUG mailing list >> [email protected] >> http://lists.rlug.org/mailman/listinfo/rlug >> >
_______________________________________________ RLUG mailing list [email protected] http://lists.rlug.org/mailman/listinfo/rlug
