I need help setting up a VPN. It's for my employer, a for-profit
company, so we're happy to pay for the support, and I'd prefer to
support a member of the local community.
We're setting up a VPN for remote access to our corporate network.
Essentially all the clients (except me) will be using Billyware to
access our ERP system from the field.
We have a T1 (some of which is used for voice) with a /29 assigned to
us. I have shorewall (2.0.13) running on a linux box doing NAT/firewall
from our internal RFC1918 network to the internet - our mail & website
are done by the fine folks at GBIS so we don't currently run any servers
internally.
To keep things nice and clean I have added a third card to the firewall
box and assigned it it's own address out of our /29. I set up OpenVPN
(2.0.5) and generated a bunch of client certificates. It starts up
fine, I (and others) can connect to it just fine, but I just cannot get
the clients to see any machines on the internal network once they
connect. I've followed the fine instructions from
http://www.shorewall.net/OPENVPN.html
but either I've messed up or something's actually broken.
If you are able to help let me know - we're in the North end of Carson
City, but I have ssh and webmin running on the firewall machine and can
set up remote access for you if that's all you need.
--
Ed Jaeger
_______________________________________________
RLUG mailing list
[email protected]
http://lists.rlug.org/mailman/listinfo/rlug
