Dear rockers, I am working on including the Vicon component to my RoCK network of components. I run the test_vicon.rb script provided with the Vicon component but I only get NaN NaN NaN repeatedly in the output.
I am using a Vicon setup with 10 cameras (MX 13+ and T20) and the Vicon hubs Ultranet and Giganet. I am running the Vicon Nexus (version 1.8.5) software in a Windows PC that is connected to the hubs. This machine has an additional network card to connect to the lab network. I have properly provided to the RoCK execution machine the IP of the Windows PC (ping is successful) and defined the Subject and Segment that I want to track. I have the feeling that I am missing something in the Vicon Nexus software environment to make it ready to provide in real-time during the test the position and orientation data of the subject that is being tracked. Someone with experience using the Vicon component can point me in the right direction here? Kind regards and happy holidays, Martin Azkarate ESA - European Space Agency Spanish Trainee, TEC-MMA - Automation and Robotics Section ESTEC - European Space research and TEchnology Centre Keplerlaan 1, PO Box 299 NL-2200 AG Noordwijk, The Netherlands [email protected] | www.esa.int Tel +31 71 565 3480 | Mob +31 650 625 564 This message and any attachments are intended for the use of the addressee or addressees only. The unauthorised disclosure, use, dissemination or copying (either in whole or in part) of its content is not permitted. If you received this message in error, please notify the sender and delete it from your system. Emails can be altered and their integrity cannot be guaranteed by the sender. Please consider the environment before printing this email.
_______________________________________________ Rock-dev mailing list [email protected] http://www.dfki.de/mailman/cgi-bin/listinfo/rock-dev
