bart deruyter wrote: > Thanks for the info Julie, but it does not quite solve my problem. > > First of all, I use Rosearden 10.10, build key 96ea4954b7, with Qt > version 4.6.2, on Ubuntustudio Lucid (10.04). > > I've managed to get multiple sounds from my keyboard with performances > without using the rosegarden instrument list for the XV88, simply > because I think it is useless in the way Rosegarden works. > > Performance instruments are a collection of instruments, which means > there is a three step selection process : > Bank -> Program -> Channel (like you said, indeed, 16 channels to > choose from) > > Rosegarden only allows a 2 step selection process : > Bank -> Program, and there it stops. > > I think this is very sad. Is this because of the change in handling > midi from pre-10.02 versions of Rosegarden? If there is any other way > to solve it, with use of the banks, please let me know. It can make > life easier in selecting sounds. > > I now just let the default settings in rosegarden are what they are > (only setting the the input from my midisport of course, which records > very well in my case, perhaps an older or newer device, but I doubt > the latter, since I already have it many years.. ), and I don't fill > in any Instrument parameters. Per track I just change the instrument > number. >
The window where you set the "instrument" number is the same screen where you change the MIDI channel. If you leave it set to the same MIDI channel, you will end up with multiple tracks all going to the same MIDI channel. Don't confuse "instrument" number (a terrible designation, IMO) with MIDI channel. > About those controllers, I import them when importing the bank for the > XV88, which I now obviously don't do anymore. They do still cause very > much trouble. Instruments end up silent, even when playing the > keyboard itself, and then I just have to switch the keyboard off and > on again. Last time, I even had to reset my keyboard to factory state > to get it working allright again. Panic doesn't clear it up, but a power down does?? Have you determined if MIDI is getting disconnected, or is CC#7 getting set to 0? -- Check out the website I've been cobbling together. It will never be done, but it's a start: http://lateralforce.no-ip.org My blog, with commentary on a variety of things, including audio, mixing, equipment, etc, is at: http://audioandmore.wordpress.com Staat heißt das kälteste aller kalten Ungeheuer. Kalt lügt es auch; und diese Lüge kriecht aus seinem Munde: 'Ich, der Staat, bin das Volk.' - [Friedrich Nietzsche] ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Rosegarden-user mailing list [email protected] - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-user
